A quick cell pic at dusk

 

can someone tell me if these rims would fit? http://honolulu.craigslist.org/oah/pts/2614145703.html 19x9 and 19x10 w/ 45+ seems kinda =\ opinions?

 

another photo with XT7:

 

i see its been a while since anyone posted in here...so heres my little contribution.

 

just picked up my Emotion CR KAI. 18x9.5 +22

 

looks good, but if you dont mind me suggesting: lose the stickers please

 

thanks i bought it with the mazda stickers they wont come off... i tried almost everything. the tein stickers i just put on to see if it looks alright...

 

just because i love being a picture *****. HIN in fort worth

 

That last picture accentuates your sunken 4x4 look nicely

 

Coming from someone that sits higher than me haha

 

With correct sized tires that don't have wheel gap* just saiyan

 

Wow, 30 pages and 7 years later mine are still going strong. We did some filming the other day, really nifty time lapse stuff, once the video is done I'll post it up. I'm not on here much but every now and then I get a few minutes to reminisce lol

 

my contribution..

 

[IMG][/IMG]

 

I have my rx sitting on eibach pro springs, i would like to install 18x9.5 with 255/35/18 on the back and also do 18x8.5 with 245/40/18 on front. Is this a good set up? I dont want to shave or rolling the fenders you guys think it will fit?

 

We need your offsets.

 

My off set are 35mm front and back

 

Question for a friend. Can we run "A"disk vsxx on our fronts or do we need "O"disk?
Here's my vs-mx

 

From WORK themselves "Yes, you do have to run A-Disk front to clear your OEM RX8 calipers, O-Disk rear would be fine with your OEM brakes."

 

My good old cr kais 18x9,5 +38 with 15mm spacers and 265/35 rs3 rubbers

 

How did that not scrub on the front ?

 

Thanks. That's what he's going with. And that's crazy wide rubber up front! I'm probably going with a 235 40 18 ish

 

hey yall ima bump this up...... show some love for my new rollers!!!

18"x9 +35 Work Meisters S1R (2 piece) A disks for all 4 corners. flat black center hi gloss black reverse lips. car is a 2005 BB so i'm hoping it will look pretty stealth. always wanted meisters so i'm pretty happy to get these.

 

Should suit it nicely I just got some Meisters too, always liked them.

My specs for those interested:


FRONT - 19×9.5 +29 - 245/35/19 - A-Disk

REAR - 19×10.5 +36 - 275/30/19 - O-Disk


I went with maximum width and offset to stay within the guards, I have a slight poke of about 4-5mm, nothing major, no mods to the front but the rear I had to roll the inner lip and then pump them out as much as I could, I also shaved the rear bumper tab back to about 4mm from the bolt hole, I also had to cut the rear inner lining out.

 

aggressive fitment, but damn looks good. meisters! FTW. i went very conservation with mine i got A disk all around in case of a brake upgrade in the future. can't wait for winter to clear up here and get these mounted. i weighed these also for anyone interested. 22lbs. so not as light as i would have thought when compared to a 18x9 Enkei RPF1 for example.