yomomspimp06

^ don't be mean...DETAILS

9krpmrx8

iTrader: (46)

Good read.

Real vs. Fake Wheel Guide | S3MAG.COM

Danmn858

iTrader: (10)

Read through it all, PROUD owner of real wheels now! yay haha.

So the wheels are forged 3 piece Work Rezax II. They're project wheels that a lot of time is going to go into since I want them to be one of a kind.
Size now is 18x8.5 +38 and 18x9.5 +28 with 2.5" and 3.5" lips. WEAK!
Currently they're black painted faces with gloss black lame DDC lips. The plan is to relip them with reverse 1.5" wider, this also lowers the offset 18mm on each wheel. The lips will be polished.
Here comes the fun part. The finish I want for the faces (chrome purple) is impossible to do with paint or powder. So the faces will need to be fully polished first, and then anodized purple.
Final sizing will be 18x10 +20 and 18x11 +10 with a 4" and 5" lip!

although I am still contemplating adding 2 more inches of lip to the front making them 18x10.5 +14. But I think only having .5" difference in the stagger might be weird.

Let me know what you all think!

d.miracle

you should have bought these.
HI **Japan** Work Rezax II 18x11+0 18x12 +0 5x114.3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Danmn858

iTrader: (10)

fender suicide. haha
although epic.

Munchy

iTrader: (2)

garbage wheels ftw

**** the haters

Danmn858

iTrader: (10)

hey varrstoens aren't garbage! They're a step above...
like recycling or something.

moonkid

iTrader: (2)

Im going with a setup very close to what u want danmn858, my wheels are getting painted now but im going with 18x10+10 and 18x11+13 weds

Danmn858

iTrader: (10)

Nice man! What size tires are you going with and what suspension are you running?

moonkid

iTrader: (2)

I think ima run 225/40 on front an 245 /40 rear but thats not for sure because i have a
Set of 235/40 dry rotting in my garage so i might use that on front if i can

moonkid

iTrader: (2)

Im on powertrix coilover btw

Danmn858

iTrader: (10)

you probably shouldn't stretch dry rotting tires haha. But yeah I think I'm gonna run those sizes also.

moonkid

iTrader: (2)

I said dry rotting because they been sitting in the garage for a couple of months but they are new tires i bought from a friend at a sweet price

Danmn858

iTrader: (10)

what kind of wheels did you get by the way?!

angeljoelv

will be joining this thread very soon.

moonkid

iTrader: (2)

weds kranze cerberus

angeljoelv

Question for munchy... u think you could have put a little bigger tire on the back if you had stayed with a 25 offset?. I ask because i ordered a set ( yes... im a copycat) and i can use all the rubber i can get. Have some power going to them rear wheels...

Munchy

iTrader: (2)

Yeah most likely. Just don't go as low.

I haven't done much research on fitting a big tire back there cause I've always been about getting lower, but I know tiltmode has put a 265 or 275 on an 11.

dencio_13@msn.com

varrstoen 9" FR 10.5 RR

Danmn858

iTrader: (10)

tilt did use a bigger tire on his varrstoens but he had a lot of issues with it because he was so low.

9krpmrx8

iTrader: (46)

Is this the "will it fit" thread now?

http://www.flickr.com/photos/9krpmrx8/8016630605/

derek king

yum, but did you raise it up?

9krpmrx8

iTrader: (46)

No I haven't raised it up. We ordered a fender roller, I need a roll in the rear for sure or I will destroy the new tires.

http://www.flickr.com/photos/9krpmrx8/8016667919/

hoss -05

iTrader: (4)

I dig the shoe in the first pick 9K...

9krpmrx8

iTrader: (46)

That was the paparazzi.