Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Trunk Liner issue

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-07-2007, 05:04 PM
  #1  
Surf Hard, Drive Hard
Thread Starter
 
Mazurfer's Avatar
 
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes on 9 Posts
Trunk Liner issue

Okay, this is really silly and not that big of a deal, but today when I removed the plastic trunk liner that runs from side to side and over the latch for an install, a small metal clip came flying off from somewhere(between the liner and the frame). I spent about 15 minutes trying to figure out where it came from when done with the install and was putting the liner back in. If you've ever taken that liner off, then you may have seen it. There is only one and I looked all over the inside of that liner for marks of where it may have come from with no luck. I also inspected all the holes or places in the sheet metal for evidence...again, no luck.
It's only about 1/2 long and looks like one of those clips that would fit over metal, and then sort of has a three flange arrangment protruding out that looks like it would then press and snap into a hole to hold whatever(part of the liner?) to the metal frame. Anybody ever seen this little bugger? again, not that big of a deal, but if some knows.............
Old 03-08-2007, 07:27 AM
  #2  
Registered
 
Go48's Avatar
 
Join Date: Jul 2004
Location: Fayetteville, PA
Posts: 2,598
Likes: 0
Received 2 Likes on 2 Posts
A pic would help if you really want to know what it is.

Edit: Actually, maybe this will help.
Attached Thumbnails Trunk Liner issue-trunkfasteners.jpg  

Last edited by Go48; 03-08-2007 at 07:36 AM.
Old 03-08-2007, 07:36 AM
  #3  
L8 BLOOMER
 
marvin_rock's Avatar
 
Join Date: Oct 2005
Location: Virginia Beach, VA
Posts: 643
Likes: 0
Received 0 Likes on 0 Posts
I've seen plenty plastic ones back there that sound what you are describing, never however a metal one.
Old 03-08-2007, 09:00 AM
  #4  
more then a Mazda
 
XRX8X's Avatar
 
Join Date: Jan 2005
Location: VIRGINIA
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
i think the clip your talking about is 1.one of the clips from the under side of the back plastic panel or 2.just an extra clip from the factory.i work at a dealership in the prep dept. and you would not think the factory loses so much on new cars.this is a small list of things found in new cars released from the factory.extra tag bolts ,seatbeat bolts that hold the seat belt on,trim clips of all sizes and shapes,plastic clips,metal clips,washers,vise grip tools,fender cover's,extra trim for door.cargo areas,extra floor mats,screws,bolts,sockets of top grade air tools,extra cup inserts,extra plugs,phillips screws of all types,*****,ford emblem on right side of car and lincoln or mercury on the other....it go's on and on...everyday something you need to look over the whole car to find if it's missing somewhere or not!!hope this helps!
Old 03-08-2007, 05:03 PM
  #5  
Surf Hard, Drive Hard
Thread Starter
 
Mazurfer's Avatar
 
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes on 9 Posts
To everyone...........I appreciate the responses. I considered that it might have just been something that was dropped in there at one time and doesn't actually go anywhere. For what it's worth............G048.....it's not on the diagram you posted, but I thank you. I did look at all the fasteners, but it's none of those.
Hell, I'm not really sure that that diagram shows the actual plastic piece that sits on top of the trunk latch and is also the piece that would be held in by the 4 cargo net tie downs????? That's the plastic piece and the metal clip found was behind it when I removed it. Again, NBD but thanks! Next time I take that piece off for any reason, maybe I'll take a quick digital photo of it................just for the hell of it.
One of life's little mysteries.
Old 03-09-2007, 08:42 AM
  #6  
Registered
 
Go48's Avatar
 
Join Date: Jul 2004
Location: Fayetteville, PA
Posts: 2,598
Likes: 0
Received 2 Likes on 2 Posts
How about these?
Attached Thumbnails Trunk Liner issue-trunkfasteners2.jpg  
Old 03-09-2007, 11:57 AM
  #7  
Surf Hard, Drive Hard
Thread Starter
 
Mazurfer's Avatar
 
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes on 9 Posts
You Da Man!
It's #8, but I'm at work and can't study the diagram, but I'll for sure look when I get home!

Thanks!
Old 03-09-2007, 12:11 PM
  #8  
Registered
 
Go48's Avatar
 
Join Date: Jul 2004
Location: Fayetteville, PA
Posts: 2,598
Likes: 0
Received 2 Likes on 2 Posts
In that case, I scanned the associated page which shows a similar clip (#3) just in case it is actually one of those. Although, I'm not sure a clip from the read inside deck trim would have ended up inside the trunk.
Attached Thumbnails Trunk Liner issue-trunkfasteners3.jpg  
Old 03-09-2007, 05:04 PM
  #9  
Surf Hard, Drive Hard
Thread Starter
 
Mazurfer's Avatar
 
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes on 9 Posts
Actually now that I had more time to look, I believe it's one of two #3's that fit on the sheet metal and attach to the plastic liner where the jack handle is held. That's in the second scan you did and wonder where the hell the other clips is?Look directly up from where the jack handle is held and you'll see two number 3's.
That's got to be it for sure and had one been left there, I would've seen it for sure, so now I gotta go find it!
Thanks tons.................I know it's a very small issue. but was bugging the crap out of me.

Thanks Again,


Dave
Old 03-09-2007, 05:05 PM
  #10  
Surf Hard, Drive Hard
Thread Starter
 
Mazurfer's Avatar
 
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes on 9 Posts
Guess I need to breakdown and by all the manuals!
Old 03-09-2007, 05:46 PM
  #11  
Registered
 
Go48's Avatar
 
Join Date: Jul 2004
Location: Fayetteville, PA
Posts: 2,598
Likes: 0
Received 2 Likes on 2 Posts
See my PM. If you're missing any of the clips the dealer can order them. I doubt if they will have them in stock.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WranglerFan
New Member Forum
4
05-31-2022 07:51 AM
nowakm99
Series II Technical and Trouble shooting
1
10-09-2015 07:10 AM
SBGarage
Vendor Classifieds
0
09-06-2015 03:30 PM
SBGarage
Sakebomb Garage
0
09-06-2015 03:29 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Trunk Liner issue



All times are GMT -5. The time now is 01:01 AM.