Hi everyone, Well have a p2259 code (Air Pump) wired pump str8 to the battery, runs and sounds normal, checked voltage at the plug and there is nothing, checked the fuse and it is good. Dosen't work warm or cold. Is there a relay or something that I'm missing? Haven't found anything in my searches for this problem.

 

Have you tried taking the UIM off and inspecting the solenoid with the blue plug and its vac lines? p0410 p0411 are secondary air injection codes. I just got done deleting mine and masking those codes.

 

Relay is under the ECU....

either it is blown...or the ECU isn't triggering it

 

sorry guys trying to clear two code and got them backwords. This one should be p2259. I know about the solnoid getting one today.

 

Check your cat converter right now mate. It's not hard 5 bolts and a rubber mount you can do on a Sunday afternoon with 2 Jacks could save you. I had same code

 

Here's the DIY I posted: P2259 DIY for removing the UIM
And here's a video:

 

My code was p0410 was air pump solenoid. After removing UIM At the back are 3 solenoids top is air pump. I think second is vacuum pump and at the bottom is ssv solenoid all look very similar

 

All three solenoids are exactly the same, it is recommended to remove the UIM(DIY) if someone needed to replace a solenoid. You can try removing a solenoid by yanking it out towards the firewall without removing the UIM, but you also risk breaking something else in the process.

 

Like the flimsy vacuum lines that attach lol