Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Overheating!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-07-2013, 07:11 PM
  #1  
Registered
Thread Starter
 
Danieltuckerdct's Avatar
 
Join Date: Feb 2013
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Overheating!

Well to be short I was at high rpms and a hose blew off the radiator, I replaced it and refilled the engine coolant. Now I'm getting a ton of white smoke whenever I crank the engine. I can't really tell that coolant is in the oil but I have lost some coolant. The engine over heats not long after its fully warmed up, so my question is what is the cause? Coolant valve blow, thermostat stuck? Any ideas?
Old 04-07-2013, 07:14 PM
  #2  
Registered
Thread Starter
 
Danieltuckerdct's Avatar
 
Join Date: Feb 2013
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
2004 with 83k
Old 04-07-2013, 07:22 PM
  #3  
Metatron
iTrader: (1)
 
StealthTL's Avatar
 
Join Date: Mar 2003
Location: A Pacific Island.
Posts: 7,280
Received 173 Likes on 130 Posts
White smoke only comes after a severe overheat, when you have melted the side seal 'O' rings.....

Your motor is, quite literally, toasted.
Old 04-07-2013, 07:37 PM
  #4  
Registered
Thread Starter
 
Danieltuckerdct's Avatar
 
Join Date: Feb 2013
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
The answer I was afraid of.
Old 04-07-2013, 11:48 PM
  #5  
Tea?
iTrader: (1)
 
yokohamaboi's Avatar
 
Join Date: May 2008
Location: shit hole south TX
Posts: 661
Likes: 0
Received 1 Like on 1 Post
Flush your coolant throughly. check your water pump and check the oil. then check your radiator for holes or leaks and all the coolant lines. if it still over heats then hopefully you have some cash for a rebuild. Oh also is the fans kicking on?
Old 04-07-2013, 11:50 PM
  #6  
Tea?
iTrader: (1)
 
yokohamaboi's Avatar
 
Join Date: May 2008
Location: shit hole south TX
Posts: 661
Likes: 0
Received 1 Like on 1 Post
if you ever get the car running back up again. Invest in a water temp gauge. by the time your factory temp gauge tells you, you might so out of luck and have a toasted motor. Also look into doing a port job while you have the motor apart.
Old 04-08-2013, 12:32 AM
  #7  
Triangular Bee Hive
iTrader: (3)
 
ShinkaEvo's Avatar
 
Join Date: Feb 2008
Location: Socal, LA
Posts: 779
Likes: 0
Received 0 Likes on 0 Posts
No point to do anything before you get a new motor.
This one is gone.
Old 04-08-2013, 02:24 PM
  #8  
Wicked Performance
 
Demon87's Avatar
 
Join Date: Sep 2012
Location: Desert hot springs, CA
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
it may also be over heating because you have an air pocket in the cooling system
Old 04-09-2013, 04:05 PM
  #9  
Registered
Thread Starter
 
Danieltuckerdct's Avatar
 
Join Date: Feb 2013
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Today i figured it out, it stopped smoking so i was like cool, and i added coolant and believe it's the coolant burning, I added a bunch of coolant today and It all dissappered, and the white smoke returned, I suppose it's time for a rebuild
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Luiss7
RX-8 Discussion
54
08-20-2019 08:56 AM
Silver_Excalibur
Series I Tech Garage
23
06-06-2019 07:23 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM
iwannarun
New Member Forum
1
09-06-2015 01:37 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Overheating!



All times are GMT -5. The time now is 07:16 PM.