oil metering pump
#1
Vtec LOL
Thread Starter
oil metering pump
My omp isn't working and I got a cel claiming the omp is stoping my motor, so I can't rev past 3k and almost no power, can any one help me find a replacement or maybe any substitutes
#2
"13B vs. Renesis" Discuss
iTrader: (28)
First... you need the OMP... your car is in limp mode because its running without proper apex/side seal lubrication. Stop driving it completely if you haven't already.
Used OMP from Mazmart: $375
http://mazmart.com/PartsList.aspx?id=9&n=USED&m=6
I know a friend of mine with a 2nd gen RX7 that removed his OMP and ran proper premix with so far success... but I don't think that will work in the rx8 because, like you mention, its computer monitored and controlled and will be in limp mode otherwise.
Replacement from Mazmart is probably your best bet. May want to try mazdatrix also.
Used OMP from Mazmart: $375
http://mazmart.com/PartsList.aspx?id=9&n=USED&m=6
I know a friend of mine with a 2nd gen RX7 that removed his OMP and ran proper premix with so far success... but I don't think that will work in the rx8 because, like you mention, its computer monitored and controlled and will be in limp mode otherwise.
Replacement from Mazmart is probably your best bet. May want to try mazdatrix also.
#7
Modulated Moderator
iTrader: (3)
Can't delete the pump...you already know what it dies without it working
Try slightly loosening the screws that hold on the pump and rotate it a few degrees...re-tighten and try that....reset the PCM and see what happens
If you move it around both directions and it still doesn't work you can remove the pump..manually turn the pump back to zero..install the switch and try that...
If that still doesn't work try and find a used pump....I got one last time for $125
Try slightly loosening the screws that hold on the pump and rotate it a few degrees...re-tighten and try that....reset the PCM and see what happens
If you move it around both directions and it still doesn't work you can remove the pump..manually turn the pump back to zero..install the switch and try that...
If that still doesn't work try and find a used pump....I got one last time for $125
Thread
Thread Starter
Forum
Replies
Last Post
SBGarage
Vendor Classifieds
0
09-06-2015 03:30 PM