balli69

Hello everyone, I have a problem here and hope u can help me. i have 05 rx8, bought it used with 1 normal key and 1 switch blade keyless entry remote.
i lost my keyless entry remote and after that i bought one keyless entry remote with un-cut blade from ebay, i programe the switch blade keyless entry remote and its working fine, doors, trunk and panic buttons are working properly. today i took that remote and my simple key which i got with my rx8 to mazda dealer to cut the blade (rx8 is parked in my garage because of snow). after coming back i try to start the car with new cutted blade but nothing, let me explain u in details, i gave the simple key and my newly programmed remote to dealer and he cut the blade.
i can open close the doors with that and when i put new key blade in ignition it turns smoothly and show all lights normal but when i try to crank the enging nothing happend and a key sign light start blinking fast. the bottom line is "new blade doing everything but not cranking the engine"
Any helps?
Thx in advance

dannobre

iTrader: (3)

Need to program the key

balli69

u mean the key in rx8's remote need to programe? remote is working fine and blade key in remote is open n close the doors and switch on, off and does everything but not crank the engine only. remote key blade is cutted same as the normal key which i was using and works fine starts engine.

RX8Soldier

iTrader: (24)

search the diy forum for how to reprogram the key.

dannobre

iTrader: (3)

Both the key and remote need to be programmed into the security system.

balli69

from dealer?

dannobre

iTrader: (3)

If you have 2 functioning keys you can DIY.....search for the DIY

balli69

no, i have only 1 which is simple old style. any solutions?

dannobre

iTrader: (3)

Dealer or a locksmith that has a programmer

Grace_Excel

iTrader: (5)

You're the second person to ask for help of the same exact problem in the past three days

balli69

ok, thx