Need help with a DTC ***P2123***
#1
Need help with a DTC ***P2123***
New guy here with a serious problem.
P2123 APP sensor No.1 circuit high input ON 1 CCM ´ (See DTC
P2123 )
This is the only code that is being thrown right now. Not exactly where to start. I did a search and didn't come up with a whole lot. The car is in limp mode and goes to about 3k rpm...
If someone could break down what "APP sensor No.1 circuit high input ON 1 CCM" means
P2123 APP sensor No.1 circuit high input ON 1 CCM ´ (See DTC
P2123 )
This is the only code that is being thrown right now. Not exactly where to start. I did a search and didn't come up with a whole lot. The car is in limp mode and goes to about 3k rpm...
If someone could break down what "APP sensor No.1 circuit high input ON 1 CCM" means
Last edited by kmastl; 11-19-2012 at 12:42 PM.
#2
Modulated Moderator
iTrader: (3)
APP = accelerator Pedal Position sensor...you have a problem in the pedal or the wiring harness between the pedal and the ECU...or possibly an ECU problem.
I would try another pedal first if the car was in an accident...the driver likely broke the pedal in the accident
I would try another pedal first if the car was in an accident...the driver likely broke the pedal in the accident
Thread
Thread Starter
Forum
Replies
Last Post