legalbegal

I have a coolant line hose and I am not sure where it connects to. I traced it to a nipple connector thats on the engine itself. its by the firewall on the backside of the engine. a hose goes connected to it and run up to the front of the engine , does anyone know where that hose connects to. thanks

Jon316G

iTrader: (1)

Is it possible to take a pic of the hose so we know exactly what you're referring to?

staticlag

Most likely it goes to the heater core.

legalbegal

https://www.rx8club.com/series-i-tech-garage-22/diy-rx-8-engine-removal-how-pics-178937/ look at this site and go to the pic right before the last pic, its a pic of the engine u can see the flywheel, there is a black hose on the engine, thats the hose I need to know where it goes connected to. thanks.

RockfordFosgate

This one is connected to the throttle actuator housing.

nycgps

iTrader: (1)

take the pic down, draw a circle with Microsoft Paint (or whatever other OS uses for basic coloring)

then post it back up.

NgoRX8

iTrader: (1)

if its coming from the engine firewall area, it's going to the bottom of the throttle body.