after mounting is changed vibration is gone. but i can hear a sound come from under the driver side... "gluk... gluk... ... " when i drive very slow

did vibration before spoilt the absorber?

 

checked my suspension. press the car on that driver side suspension. and the sound is exactly the same as the one i hear in the car.

suspension broken?

 

Potential problem:

http://www.finishlineperformance.com...2-04-1301b.pdf

anyone experience before?

 

Yes. Use a torque wrench to make sure your wheels are tightened to the values specified in that document.

I answered this in another one of your threads. You have at least 3 threads open for this subject. That wastes peoples' time because they may not know that your question was already answered elsewhere.

 

thats why i open 3 thread, cause it was an emergency. i did open only 1 at 1st.
but after a few hours of waiting i open up another 2 for more info.

 

Ok guys i did a full check today i found the sound. it was from my absorber spring.

all of this is due to the vibration of bad mounting. causing things to nuts on the absorber to rattle, spring was slidely displace.

solution: my mechanic turn the spring to its original posiition (matching the brakets). tighten all the screws on the absorber. put grease on the contact point between the spring and lower braket. sound is gone when u place everything back.