idle issues
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: MIami
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
idle issues
I installed a K&N intake, and I"m haveing idle issues. For some reason w/ the A/C on, my idle keeps jumping. Does anyone know what the valve is on air box, it has a green connector on it. Or what I should do w/ the air hose in the stock box. Any help is much appreciated.
#4
Registered User
Thread Starter
Join Date: Jul 2007
Location: MIami
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Thanks for the help, but i was actully changing out the AEM intake. I can't use that system here in Miami. The AEM intake was installed by the dealership by the previous owner. In the bottom of the stock air box there is a air line hooked up to a metal line that is in the box. Not sure if it should be connected to anything. By the way any idea of the valve I'm talking about, since your quick to respond THANKs
#5
13BEAST
Join Date: Mar 2007
Location: Union City, CA
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
is it the line that hooks up all the way to the bottom of the throttle body? if it is, then that is useless. the instructions on my intake says to take off that line and PLUG UP the hole it leaves under the throttle body. here's a pic: https://www.rx8club.com/showthread.p...cing+beat+revi .
#7
13BEAST
Join Date: Mar 2007
Location: Union City, CA
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
if it's the one with maf, then yes. i just tied mine around the maf sensor line with electrical tape so it doesnt flap around. i didn't want to cut just in case it might be of further use later on. you might want to tie the rest of the lines (lines that were connected to the stock air box tray), with tie wrap or zip ties.
Thread
Thread Starter
Forum
Replies
Last Post
gwailo
New Member Forum
30
06-07-2020 12:21 PM