Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Help! Alarm issues

Thread Tools
 
Rate Thread
 
Old Aug 19, 2007 | 03:03 PM
  #1  
Tre Blue's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 4
Likes: 0
Help! Alarm issues

I have the factory-installed alarm on my 05 RX-8, and I'm hoping someone can help me out. Is there a manual on-off switch? Is it possible to turn the alarm off and keep it off until you want it on again? It's such a hassle to have the alarm sounding every couple of minutes at the car wash, and having it reset itself while I'm in the trunk, etc.!
Reply
Old Aug 19, 2007 | 03:07 PM
  #2  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
Your "Factory Alarm" should not be going off until you open a door. If it has the "Factory" motion sensor, then it will go off if something BIG hits the car.
So what is setting it off?
If it keeps going off then it sounds like you have an aftermarket alarm.
Reply
Old Aug 19, 2007 | 03:35 PM
  #3  
Tre Blue's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 4
Likes: 0
I guess it's the motion sensor - it goes off when water hits it in the wash, when the trunk or hood is closed, when I'm wrenching / working on brakes, etc. Loud noises set it off, too (like bass). It is definitely not aftermarket.
Reply
Old Aug 19, 2007 | 03:41 PM
  #4  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,286
Likes: 184
From: A Pacific Island.
It is on the footwell wall on the passenger side, and may be up behind the plastic there.

The little square box has a control **** on it for adjustment....

S
Reply
Old Oct 24, 2007 | 08:23 AM
  #5  
jptalky's Avatar
'04 SS
iTrader: (1)
 
Joined: Nov 2005
Posts: 191
Likes: 0
From: Fort Worth (DFW)
I have a very similar problem. I park it and walk away and 80% of the time 10min later the alarm starts going off. Do you think it would be the battery dying, because it starts and I have never had to jump it. Where is this control **** exactly?
Reply
Old Oct 26, 2007 | 07:31 AM
  #6  
RxJaye's Avatar
Registered
iTrader: (2)
 
Joined: Mar 2007
Posts: 130
Likes: 0
From: Lexington KY
just adjust the sensitivity of the thing. It is in the pass fllorboard mounted around the blower motor. It has a **** top adjust it. Suppose to be adjust where it will go off only if a tennis ball dropped from 1 meter above the windsheild hits it. No less force should set it off. I adjusted mine this way and very very rarely does it go off with out being hit.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
Feb 10, 2020 10:23 PM
WranglerFan
New Member Forum
4
Nov 5, 2017 09:35 AM
Fickert
Series I Major Horsepower Upgrades
7
Sep 9, 2015 01:21 PM
tgaffner
New Member Forum
3
Sep 7, 2015 08:49 PM
nivong
Europe For Sale/Wanted
0
Sep 2, 2015 07:54 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:01 PM.