f**k, my car won't start
#1
Calle
Thread Starter
Join Date: Dec 2007
Location: paderborn, germany
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
f**k, my car won't start
bought my car second hand, have had no dramas till about three months ago! try to drive my car one day and it wouldn't start! no dramas there, got it towed to the garage, they checked it out!
"probleme, your getting no copression in one of the ratary chambers, you'll need a complete new engine!"
????is that fact or fiction????
normally it should be covered by the waranty!
"2nd probleme, after informing the waranty company, they went bankrupt!"
wont to take matters in to my own hand now! know a fair bit about engines, but not much about ratary engines!
so if there anyone out there who can give me any info, tips or tricks, about how to break down the engine to change the seals then i would be very greatfull!
and i'm sure if you should need help, i would be fully obliged to help you aswell!
cheers jonesyrx8
"probleme, your getting no copression in one of the ratary chambers, you'll need a complete new engine!"
????is that fact or fiction????
normally it should be covered by the waranty!
"2nd probleme, after informing the waranty company, they went bankrupt!"
wont to take matters in to my own hand now! know a fair bit about engines, but not much about ratary engines!
so if there anyone out there who can give me any info, tips or tricks, about how to break down the engine to change the seals then i would be very greatfull!
and i'm sure if you should need help, i would be fully obliged to help you aswell!
cheers jonesyrx8
Last edited by jonesyrx8; 12-22-2007 at 11:06 AM.
#2
Modulated Moderator
iTrader: (3)
Best bet is to either buy a rebuilt from Mazmart.....phone Paul or Will
Or buy a good -low mile engine from an auto wreckers and swap it out
I just bought one for a bit over 2K..
Trying to do a rebuild will cost you that much in seals and gaskets etc.....and you probably have more expensive problems than that
Or buy a good -low mile engine from an auto wreckers and swap it out
I just bought one for a bit over 2K..
Trying to do a rebuild will cost you that much in seals and gaskets etc.....and you probably have more expensive problems than that
#7
Out of NYC
iTrader: (1)
bought my car second hand, have had no dramas till about three months ago! try to drive my car one day and it wouldn't start! no dramas there, got it towed to the garage, they checked it out!
"probleme, your getting no copression in one of the ratary chambers, you'll need a complete new engine!"
????is that fact or fiction????
normally it should be covered by the waranty!
"2nd probleme, after informing the waranty company, they went bankrupt!"
wont to take matters in to my own hand now! know a fair bit about engines, but not much about ratary engines!
so if there anyone out there who can give me any info, tips or tricks, about how to break down the engine to change the seals then i would be very greatfull!
and i'm sure if you should need help, i would be fully obliged to help you aswell!
cheers jonesyrx8
"probleme, your getting no copression in one of the ratary chambers, you'll need a complete new engine!"
????is that fact or fiction????
normally it should be covered by the waranty!
"2nd probleme, after informing the waranty company, they went bankrupt!"
wont to take matters in to my own hand now! know a fair bit about engines, but not much about ratary engines!
so if there anyone out there who can give me any info, tips or tricks, about how to break down the engine to change the seals then i would be very greatfull!
and i'm sure if you should need help, i would be fully obliged to help you aswell!
cheers jonesyrx8
I have a hard time understanding your *Ratary* stuff.
When you're done with school, please check your VIN with Mazda to see if you're still in Warranty. If yes, tow it to Mazda, if not, Tell us your location, theres not that many garage out there knows what a *Rotary Engine* is. They probably have no idea how to do a *proper* compression test.
#8
Finally a MT
iTrader: (11)
bought my car second hand, have had no dramas till about three months ago! try to drive my car one day and it wouldn't start! no dramas there, got it towed to the garage, they checked it out!
"probleme, your getting no copression in one of the ratary chambers, you'll need a complete new engine!"
????is that fact or fiction????
normally it should be covered by the waranty!
"2nd probleme, after informing the waranty company, they went bankrupt!"
wont to take matters in to my own hand now! know a fair bit about engines, but not much about ratary engines!
so if there anyone out there who can give me any info, tips or tricks, about how to break down the engine to change the seals then i would be very greatfull!
and i'm sure if you should need help, i would be fully obliged to help you aswell!
cheers jonesyrx8
"probleme, your getting no copression in one of the ratary chambers, you'll need a complete new engine!"
????is that fact or fiction????
normally it should be covered by the waranty!
"2nd probleme, after informing the waranty company, they went bankrupt!"
wont to take matters in to my own hand now! know a fair bit about engines, but not much about ratary engines!
so if there anyone out there who can give me any info, tips or tricks, about how to break down the engine to change the seals then i would be very greatfull!
and i'm sure if you should need help, i would be fully obliged to help you aswell!
cheers jonesyrx8
#9
Calle
Thread Starter
Join Date: Dec 2007
Location: paderborn, germany
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Best bet is to either buy a rebuilt from Mazmart.....phone Paul or Will
Or buy a good -low mile engine from an auto wreckers and swap it out
I just bought one for a bit over 2K..
Trying to do a rebuild will cost you that much in seals and gaskets etc.....and you probably have more expensive problems than that
Or buy a good -low mile engine from an auto wreckers and swap it out
I just bought one for a bit over 2K..
Trying to do a rebuild will cost you that much in seals and gaskets etc.....and you probably have more expensive problems than that
#11
Registered
Join Date: Jul 2004
Location: Northern California
Posts: 2,196
Likes: 0
Received 0 Likes
on
0 Posts
#14
Calle
Thread Starter
Join Date: Dec 2007
Location: paderborn, germany
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
ur a f**king pr*ck who hasen't got a clue!if i wasn't able to fix it i would! but i've got a lot of selfconfidence and knowledge! i've been fixing cars 4 years! don't need no janky **** to tell to tell me how to do things! go cry and take urs to the garage D**khead
Last edited by jonesyrx8; 01-03-2008 at 11:54 AM.
#15
Calle
Thread Starter
Join Date: Dec 2007
Location: paderborn, germany
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#16
Calle
Thread Starter
Join Date: Dec 2007
Location: paderborn, germany
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
i've already tried going down that road but mazda germany say "no", i should have extended the warranty before it expired! **** happens! but saying that, because i bought the car second hand i was covered by a secondary warranty contract, which went bankrupt at the time when i put my claim in to them! dobble **** happens! :-)
oh by the way it is a five speed manual transmission! you cant get them here in europe with an AT
its got 60000kms on the clock thats roughly 36000 miles
#17
Out of NYC
iTrader: (1)
Fixing cars? You mean replacing parts ?
Woo I can replace a light bulb when I was 4 ~~~~
If you are all that *1337*, this post wouldnt even exist.
and self confidence is important, but when it comes to something like this. You need knowledge. which is something you clearly lack of.
if u're all that knowledgeable, theres a FOR GOD'S SAKE SEARCH Button right on top of the site. Are you too smart to search or something ?
sitting here and swearing wont get you anywhere. Try harder, Smart guy.
Last edited by nycgps; 01-03-2008 at 12:07 PM.
#18
Calle
Thread Starter
Join Date: Dec 2007
Location: paderborn, germany
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
You got an e-***** right there ~
Fixing cars? You mean replacing parts ?
Woo I can replace a light bulb when I was 4 ~~~~
If you are all that *1337*, this post wouldnt even exist.
and self confidence is important, but when it comes to something like this. You need knowledge. which is something you clearly lack of.
if u're all that knowledgeable, theres a FOR GOD'S SAKE SEARCH Button right on top of the site. Are you too smart to search or something ?
sitting here and swearing wont get you anywhere. Try harder, Smart guy.
Fixing cars? You mean replacing parts ?
Woo I can replace a light bulb when I was 4 ~~~~
If you are all that *1337*, this post wouldnt even exist.
and self confidence is important, but when it comes to something like this. You need knowledge. which is something you clearly lack of.
if u're all that knowledgeable, theres a FOR GOD'S SAKE SEARCH Button right on top of the site. Are you too smart to search or something ?
sitting here and swearing wont get you anywhere. Try harder, Smart guy.
#19
space for rent
iTrader: (2)
Join Date: Aug 2006
Location: Kansas City, MO
Posts: 2,714
Likes: 0
Received 0 Likes
on
0 Posts
step 2: open hood
step 3: stick head under hood
step 4: close hood
step 5: open hood
step 6: repeat steps 4 and 5 as necessary
reverse steps to reassemble.
#20
Calle
Thread Starter
Join Date: Dec 2007
Location: paderborn, germany
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#21
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: Valdosta, GA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
http://www.finishlineperformance.com.../pdf/ad-18.pdf
Go there and read that, I don't know if thats US only or what, just read it....
**nvm says north american operations** Maybe germany has something similiar, sorry about your problem
Go there and read that, I don't know if thats US only or what, just read it....
**nvm says north american operations** Maybe germany has something similiar, sorry about your problem
Last edited by RX8 dood; 01-03-2008 at 12:23 PM.
#22
Out of NYC
iTrader: (1)
http://www.finishlineperformance.com.../pdf/ad-18.pdf
Go there and read that, I don't know if thats US only or what, just read it....
**nvm says north american operations** Maybe germany has something similiar, sorry about your problem
Go there and read that, I don't know if thats US only or what, just read it....
**nvm says north american operations** Maybe germany has something similiar, sorry about your problem
Cuz Mazda fuxked up the programming.
Please I mean next time if you dont know something in details ... please dont tell anyone about it.
#25
Rotary wanabee
iTrader: (1)
Join Date: Jul 2007
Location: Long Island, NY
Posts: 1,978
Likes: 0
Received 0 Likes
on
0 Posts
sorry for statin the obvious.... but there is spark, fuel, air and such right .... everythign working great?
a mechanic told me i blew my engine. the wire connector on one of my coils was loose. yeah......
a mechanic told me i blew my engine. the wire connector on one of my coils was loose. yeah......