clutch problems
#1
Registered User
Thread Starter
Join Date: May 2012
Location: Houston, Tx
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
clutch problems
I've been experiencing some minor noise from my clutch mainly squeaking when pressing or depressing the clutch peddle (going on for 2 months)but recently I've been experiencing a squealing noise like a bad belt but went away after depressing the clutch (going on for about 3 days) but just now the clutch peddle started sticking while depressing the clutch i was 1 block away from the house when this had happened when i got in the drive checked the fluid level is fine the clutch bracket is fine no play hasn't broke yet but when i restarted the car and pressed the clutch the engine sounds like it wants to stall just need some clarity on whats going on and what i can do to diagnose so i can know what to replace
#2
That is the bearing, which is normal for it to squeek on our cars.
Some mechanics have been able to squirt lube up there to resolve the squeek.
Do a search on pilot bearing.
Some mechanics have been able to squirt lube up there to resolve the squeek.
Do a search on pilot bearing.
#3
Registered User
Thread Starter
Join Date: May 2012
Location: Houston, Tx
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I got that part I work at a custom fab shop i'm remaking the clutch bracket the problem is the peddle is sticking to the floor when I let off the clutch
#4
Got Ink?
Is this also accompanied by difficulty shifting and/or a crunching or grinding sound when shifting gears?
Last edited by Joe-the_tattoo_artist; 06-09-2012 at 01:41 PM.
#6
Registered User
Thread Starter
Join Date: May 2012
Location: Houston, Tx
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Ok found the problem it was the throw out bearing it was in 7 pieces when I dropped the tranny, pressure plate and clutch look fine i'm replacing them anyways
Thread
Thread Starter
Forum
Replies
Last Post