Cell after seafoam.
#1
Cell after seafoam.
I have a cell after doing this.
my friends OBD2 scanner can't read it, keeps saying Error. Cen-tech from harbor freight. Guess it does not have the CAN part.
I am reading that this is normal after doing the seafoam, is this true?
Some people say they got one while other didn't. I'm not sure what to do, I would like to know what the error is before going anywhere.
Is there anyone in NOVA who has a read that will work on the 8?
also, I had a TON of smoke with 30,000 on the clock.
my friends OBD2 scanner can't read it, keeps saying Error. Cen-tech from harbor freight. Guess it does not have the CAN part.
I am reading that this is normal after doing the seafoam, is this true?
Some people say they got one while other didn't. I'm not sure what to do, I would like to know what the error is before going anywhere.
Is there anyone in NOVA who has a read that will work on the 8?
also, I had a TON of smoke with 30,000 on the clock.
#2
Administrator
iTrader: (7)
most likely it's due to you disconnecting the ESS.
should go away in a few drive cycles
should go away in a few drive cycles
#7
turn key to on position, hit brake 20 times till oil pressure goes halfway then back, an hold trip meter while turning on till says testing...think that rite...i googled cel clear to find it...
Thread
Thread Starter
Forum
Replies
Last Post
Touge
Canada Forum
1
09-23-2019 06:45 PM
Touge
Canada Forum
0
09-23-2015 10:51 PM
Touge
Canada Forum
0
09-22-2015 11:51 PM