[URGENT HELP] Need to identify this tube - Page 2

Aug 30, 2014 | 08:21 PM

#26

TimmyG

Registered

iTrader: (1)

Joined: Jul 2010

Posts: 57

Likes: 0

From: Aylmer Ontario

I don't know why you had to remove the hose that connect to the oil fill, but I would try putting that hose cover over that hose and if it slides over you found it.

Attached Thumbnails

[URGENT HELP] Need to identify this tube-img_20140830_211333.jpg

Aug 30, 2014 | 08:28 PM

#27

vX-2

Thread Starter

Registered

iTrader: (2)

Joined: Jul 2008

Posts: 111

Likes: 0

From: Lincoln, Nebraska

AFTER studying and going through the forums DIY pics.

I think I've found where this tube belongs.....

Name: ssWbJfO.jpg
Views: 21
Size: 68.6 KB

I'm about 100% sure it's that, since mine didn't have it

Aug 30, 2014 | 08:32 PM

#28

vX-2

Thread Starter

Registered

iTrader: (2)

Joined: Jul 2008

Posts: 111

Likes: 0

From: Lincoln, Nebraska

Quote:

Originally Posted by TimmyG

I don't know why you had to remove the hose that connect to the oil fill, but I would try putting that hose cover over that hose and if it slides over you found it.

Name: LX6fkyV.jpg
Views: 21
Size: 54.8 KB

I was thinking to clean the throttle body as well.

THANKS A BUNCH FOR THE HELP AS WELL !!!

Aug 31, 2014 | 02:29 AM

#29

infiltr_eight

Registered

Joined: May 2014

Posts: 111

Likes: 3

From: Berlin Germany

@vX-2: The hose u showed first is the protective cover on the VFAD vacuum line under the Air box ... just slip it back over the vacuum line. (its the line going from the cylindrical chamber to the metal vacuum pipe which leads to the VFAD.

In the last pic u showed a clip ... u dont need to open the clip to move the harness away ... just take a small flat plier an press the tab underneath it (it's in a square hole in the coil bracket) while pulling the harness up.

Greetings Thomas