Titaniumtt

iTrader: (1)

Is there any online source that has the FSM for the RX8 6-spd? Just about every single RX7 piece of lit that came from the factory can be found online, wondering if someone took the time to put some lit that pertains to the RX8's tranny online. I've searched and searched (here and elsewhere) and can't find anything.

Thanks guys.

ken-x8

RX-8 FSM:

http://www.hi-impact.org/ryang/modif...8_manuals.html

FSM Himself:

http://www.venganza.org/

May you be touched...

Ken

nycgps

iTrader: (1)

next time, any questions, search is ur friend.

seriously, SEARCH

thx

Titaniumtt

iTrader: (1)

Thanks, yeah I did, didn't find anything. Appreciate the help though, that's great.



Thanks Ken, what I'm really looking for is the lit that breaks down the complete tranny dissasmbly/rebuild. The FSM is awesome, but it doesn't go into any detail other than remove/install. Is there a seperate transmission book for this particular Aisin box?

Thanks Guys
-B

TeamRX8

iTrader: (25)

The factory FSM does not cover the engine or transmission or electrical in detail.

These are all covered in their own FSMs for each one

The dealer can get them, but they're usually FS on Ebay at a cheaper price

anthonyallred

Dont suppose anyone has this detailed transmission teardown info / FSM in PDF format?

Really looking for the Transmission Bell Housing Bolt Torque specs. Seems my transmission is is leaking from one of the bellhousing seams.

j9fd3s

Foxed.ca - Mazda RX-7 Manuals

Carbon8

iTrader: (4)

You have bigger issues than that, their should be no fluid inside the bellhousing. The bellhousing has a hole at the bottom of it to drain fluids that may leak inside.

If you have fluid in your bellhousing its probably oil from a rear main seal failing.

NO_PSTNS

^^ Bingo.

Karack

or it could be residual from sloppy oil changes.

the factory position for the oil filter has much to be desired.