renesis removal/rebuild
#177
Registered
89-91 RX-7, 160hp, 140 ft lbs tq
RX-8, 238hp (225 hp?) ,159 ft lbs tq
Of course we can also look at it from a chassis dyno perspective as well:
http://www.rx7.com/rx7rx8comparo.html
RX-8, 238hp (225 hp?) ,159 ft lbs tq
Of course we can also look at it from a chassis dyno perspective as well:
http://www.rx7.com/rx7rx8comparo.html
#178
Of course we can also look at it from a chassis dyno perspective as well:
http://www.rx7.com/rx7rx8comparo.html
http://www.rx7.com/rx7rx8comparo.html
#182
kevin@rotaryresurrection
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
This does not show you how to do a rebuild, no more than burger king will show you how to make the whopper exactly as they do. It was simply an overview of the process with some scattered pics. I have several more recent rebuild threads where the some of the pics should still show up, if you want to see the same process.
#184
kevin@rotaryresurrection
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
Can you elaborate on that thought any?
Also what's the status of your project? I see you're a budding engine builder now, so I'm curious how yours finally worked out.
Also what's the status of your project? I see you're a budding engine builder now, so I'm curious how yours finally worked out.
#185
WENTGERMAN
iTrader: (6)
Thought elaboration: Demands from random people for something you did for free, just becuase you care. Then you responding to them in a polite way. that got compliments from me. I would have been a bit more harsh.
The build is going well so far. Close to 3k on it, makes good power, no leaks, starts normally . Still haven't gotten a compression test or had it on the dyno. I plan on doing the compression test soon, maybe at seven stock.
I did have a bad miss shift on it though and fubar'd the clutch. Also it has a small leak from the oil pan which I will need to remove once again. When I change the clutch out I will be doing the oil pan as well.
So overall the build itself turned out pretty well.
The build is going well so far. Close to 3k on it, makes good power, no leaks, starts normally . Still haven't gotten a compression test or had it on the dyno. I plan on doing the compression test soon, maybe at seven stock.
I did have a bad miss shift on it though and fubar'd the clutch. Also it has a small leak from the oil pan which I will need to remove once again. When I change the clutch out I will be doing the oil pan as well.
So overall the build itself turned out pretty well.
#186
kevin@rotaryresurrection
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
What was the story with the lack of endplay etc and how did you wind up resolving it? That was the last I heard of it, when I sent you that front bolt.
And, that hasn't been more than what, a couple months ago? How the HELL did you put 3k miles on that bitch already? It's been right at 2 years since I installed the rebuilt 6 port engine in my rx8 when I did the MT swap in summer of 08, and as of today it has right at 8300 miles on it.
And, that hasn't been more than what, a couple months ago? How the HELL did you put 3k miles on that bitch already? It's been right at 2 years since I installed the rebuilt 6 port engine in my rx8 when I did the MT swap in summer of 08, and as of today it has right at 8300 miles on it.
Last edited by RotaryResurrection; 08-15-2010 at 09:44 PM.
#190
kevin@rotaryresurrection
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
Look for my other threads, you'll find plenty of pics. There is a recent teardown/build thread on an 04 AT that the pics should still work for.
#193
kevin@rotaryresurrection
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
We can search back and find a 4 year old thread and complain that the pics are gone, but we missed the stickies at the top of the tech page for removal and teardown that still have all their pics.
Thread
Thread Starter
Forum
Replies
Last Post
gtorx7
RX-8 Parts For Sale/Wanted
3
05-30-2016 07:46 PM
badinfluence
Series II Aftermarket Performance Modifications
6
08-31-2015 11:51 AM