Removing Shifter Panel. HOW?
03-16-2004, 06:29 PM
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: Singapore
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Removing Shifter Panel. HOW?
Hi guys,
Need a quick help.
I'm trying to access to the shifter area (inside). The panel where the shifter and navi is, read from some where that all i need is to yank it out right? But, I've try and the panel seems stuck. I didn't wanted to break anything, so here I am, asking if anyone else that has tried removing the panel, please advise if there's a technique of doing so.
Thank you so much for any help.
M-ster
Need a quick help.
I'm trying to access to the shifter area (inside). The panel where the shifter and navi is, read from some where that all i need is to yank it out right? But, I've try and the panel seems stuck. I didn't wanted to break anything, so here I am, asking if anyone else that has tried removing the panel, please advise if there's a technique of doing so.
Thank you so much for any help.
M-ster
03-16-2004, 06:33 PM
#2
Registered User
Join Date: Jan 2004
Location: Los Angeles
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
This might help a little - only pictures, but may give you an idea:
https://www.rx8club.com/showthread.p...r&pagenumber=1
https://www.rx8club.com/showthread.p...r&pagenumber=1
03-16-2004, 06:58 PM
#3
Registered User
Side a screwdriver wrapped in electrical tape between the silver trim and the black pieces. Twist slightly, and you'll hear a click and it'll become lose. Go around the edge like that, and it'll pop right off.
03-16-2004, 07:05 PM
#5
Registered
Join Date: Oct 2001
Location: Boulder County, Colorado
Posts: 7,966
Likes: 0
Received 4 Likes
on
3 Posts
Originally posted by winter
Side a screwdriver wrapped in electrical tape between the silver trim and the black pieces. Twist slightly, and you'll hear a click and it'll become lose. Go around the edge like that, and it'll pop right off.
Side a screwdriver wrapped in electrical tape between the silver trim and the black pieces. Twist slightly, and you'll hear a click and it'll become lose. Go around the edge like that, and it'll pop right off.
Thread
Thread Starter
Forum
Replies
Last Post
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
09-29-2015 05:05 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM