Removing Shifter Panel. HOW?
Hi guys,
Need a quick help. I'm trying to access to the shifter area (inside). The panel where the shifter and navi is, read from some where that all i need is to yank it out right? But, I've try and the panel seems stuck. I didn't wanted to break anything, so here I am, asking if anyone else that has tried removing the panel, please advise if there's a technique of doing so. Thank you so much for any help. M-ster |
This might help a little - only pictures, but may give you an idea:
https://www.rx8club.com/showthread.p...r&pagenumber=1 |
Side a screwdriver wrapped in electrical tape between the silver trim and the black pieces. Twist slightly, and you'll hear a click and it'll become lose. Go around the edge like that, and it'll pop right off.
|
Thank you guys, will try it when i get to the car.
cheers. |
Originally posted by winter Side a screwdriver wrapped in electrical tape between the silver trim and the black pieces. Twist slightly, and you'll hear a click and it'll become lose. Go around the edge like that, and it'll pop right off. |
All times are GMT -5. The time now is 09:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands