Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

polishing smoked tail lights

Thread Tools
 
Rate Thread
 
Old Dec 7, 2008 | 02:14 PM
  #1  
pup's Avatar
pup
Thread Starter
holla if u hear me
 
Joined: Oct 2008
Posts: 192
Likes: 0
From: on a softball field somewhere
Question polishing smoked tail lights

just smoked my tail lights.....just cant seem to figure out how get them nice and shined up.....my bufffer freakin broke/......any suggestions from past experiences.... i searched a few threads but no one said anything about the final polish.....thanks in advance
Reply
Old Dec 9, 2008 | 07:58 PM
  #2  
TheBurkeMan's Avatar
Registered
 
Joined: Oct 2008
Posts: 322
Likes: 0
From: LaVergne, TN
did you paint the inside of the light or the outside of the light?
Reply
Old Dec 9, 2008 | 08:22 PM
  #3  
pup's Avatar
pup
Thread Starter
holla if u hear me
 
Joined: Oct 2008
Posts: 192
Likes: 0
From: on a softball field somewhere
b-man

i did the outside......today i got a new buffer and some polishing cream.....they came out nice.......my freakin' wife even liked it....amazin.....but tell me what you suggest......thanks bro
Reply
Old Dec 9, 2008 | 08:30 PM
  #4  
TheBurkeMan's Avatar
Registered
 
Joined: Oct 2008
Posts: 322
Likes: 0
From: LaVergne, TN
i was just gonna say polish them by hand, but since you got a buff wheel i guess that works too.
Reply
Old Jan 26, 2009 | 12:05 PM
  #5  
Semiazas's Avatar
The Dark Carnival
 
Joined: Jan 2009
Posts: 105
Likes: 0
From: Boca Raton, FL
What was used to smoke them out with.
Reply
Old Feb 15, 2009 | 02:23 AM
  #6  
always.anthony's Avatar
is looking for his torque
 
Joined: Sep 2008
Posts: 841
Likes: 0
pics please!
Reply
Old Feb 15, 2009 | 09:10 AM
  #7  
13bturbofc's Avatar
400whp RX-7+05 RX-8=BROKE
 
Joined: May 2007
Posts: 265
Likes: 0
From: lancaster pa
i hope you clear coated them...when i smoked mine with vht they looked like flat black spray paint which looked like crap so i put 3 coats of automotive (not rattle can) clear coat on them. then allowed them to dry then wetsanded with 1500 and buffed them with compound and a good high speed buffer
Reply
Old Feb 15, 2009 | 02:22 PM
  #8  
always.anthony's Avatar
is looking for his torque
 
Joined: Sep 2008
Posts: 841
Likes: 0
Originally Posted by 13bturbofc
i hope you clear coated them...when i smoked mine with vht they looked like flat black spray paint which looked like crap so i put 3 coats of automotive (not rattle can) clear coat on them. then allowed them to dry then wetsanded with 1500 and buffed them with compound and a good high speed buffer
lol pics please!
Reply
Old Feb 15, 2009 | 05:53 PM
  #9  
13bturbofc's Avatar
400whp RX-7+05 RX-8=BROKE
 
Joined: May 2007
Posts: 265
Likes: 0
From: lancaster pa
ill try to get some tomorrow. i just did this to my rx7 tail lights tonight and im gonna clear them tomorrow
Reply
Old Mar 1, 2009 | 06:37 PM
  #10  
pup's Avatar
pup
Thread Starter
holla if u hear me
 
Joined: Oct 2008
Posts: 192
Likes: 0
From: on a softball field somewhere
smoked

here are my tail lights. i like the way they turned out. it looks good on red............sorry if my car is a little dirty........i used the vht tint spray and a can of clear coat from autozone...........4 light coats of the tint and 3 of the clear and 2 good polishings.........hope everyone likes it
Attached Thumbnails polishing smoked tail lights-shanes-car-001.jpg   polishing smoked tail lights-shanes-car-002.jpg   polishing smoked tail lights-shanes-car-003.jpg   polishing smoked tail lights-shanes-car-004.jpg   polishing smoked tail lights-shanes-car-006.jpg  


Last edited by pup; Mar 1, 2009 at 07:57 PM.
Reply
Old May 5, 2009 | 02:29 AM
  #11  
MyZoomZoomRX8's Avatar
Zerroom
 
Joined: Jan 2009
Posts: 121
Likes: 0
it looks like you didnt paint around the brake light...did you use anything special to cover that up or did you just tape it? Gotta make sure I keep that perfect circle on there
Reply
Old May 6, 2009 | 06:09 PM
  #12  
pup's Avatar
pup
Thread Starter
holla if u hear me
 
Joined: Oct 2008
Posts: 192
Likes: 0
From: on a softball field somewhere
i didnt tape it or anything.......i just did the lights coats.....held the can about 6 inches away so it would very lightly coated and took my time,,,,,same thing with the clear coats....dont rush it......i didnt want mine real dark anyways
Reply
Old May 6, 2009 | 06:51 PM
  #13  
White_Shadows's Avatar
Registered User
 
Joined: Jan 2009
Posts: 298
Likes: 0
From: Sacramento, CA
I did mine super duper dark on my 626. I just did very small coats and waited till it was super dry before each coat and did like 30 coats then did a few clear coats over the top. The lighter the coatings the better.
Reply
Old May 7, 2009 | 02:58 PM
  #14  
MyZoomZoomRX8's Avatar
Zerroom
 
Joined: Jan 2009
Posts: 121
Likes: 0
AL

Originally Posted by pup
i didnt tape it or anything.......i just did the lights coats.....held the can about 6 inches away so it would very lightly coated and took my time,,,,,same thing with the clear coats....dont rush it......i didnt want mine real dark anyways
I see I see....so then you actually did paint the entire brake light...i seen a picture on here the other day where they had paints around that brake light. so the entire taillight was dark except for the circle brake light...dats what I thought you had done....it looks good nonetheless....may have to try it myself...about how long did it take you to do them?
Reply
Old May 7, 2009 | 03:47 PM
  #15  
416to212's Avatar
Utopia Taco Bell
 
Joined: May 2006
Posts: 902
Likes: 1
From: * Queens NY *
Hey PUP.

I noticed you have little convex mirrors on your side view mirrors. How do you like them?

Can you park easier?
Is you placement of the mirrors ideal?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WranglerFan
New Member Forum
4
May 31, 2022 07:51 AM
RXFEVER
RX-8 Parts For Sale/Wanted
38
Aug 29, 2018 10:14 AM
RXFEVER
West For Sale/Wanted
17
Sep 11, 2016 02:51 PM
vapor2
NW RX-8 Forum
1
Sep 17, 2015 07:43 AM
erikcamacho15
New Member Forum
0
Sep 12, 2015 11:23 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:50 AM.