Oil Filter Relocation Kits!
#1
Oil Filter Relocation Kits!
We now have new higher quality Oil filter relocation kits available for the RX-8!
This is a High End kit with the following:
- All aluminum AN Fittings
- Stainless Steel braided hose that comes in black hose and black fittings or silver with red and blue fittings.
- Includes fittings for both M20 and 3/4 UNF thread sizes
- AN Fittings Pre-Installed on the hose so there is no chance for error of the proper torque which means no leaks and it is already done for you!
- Lines are pre-cut and will be 30 inches long each
- Each hose will have one straight end and one 90 degree
- Mounting bracket
- Two threaded taps for an oil pressure gauge and oil temp gauge
Currently INSTOCK and Ready to ship!
Orders can be placed on the website:
http://raceroots.com/index.php/produ...ation-kit.html
Piktars!
This is a High End kit with the following:
- All aluminum AN Fittings
- Stainless Steel braided hose that comes in black hose and black fittings or silver with red and blue fittings.
- Includes fittings for both M20 and 3/4 UNF thread sizes
- AN Fittings Pre-Installed on the hose so there is no chance for error of the proper torque which means no leaks and it is already done for you!
- Lines are pre-cut and will be 30 inches long each
- Each hose will have one straight end and one 90 degree
- Mounting bracket
- Two threaded taps for an oil pressure gauge and oil temp gauge
Currently INSTOCK and Ready to ship!
Orders can be placed on the website:
http://raceroots.com/index.php/produ...ation-kit.html
Piktars!
#21
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
Recommended mounting locale?
Oh, I like that black one!
Might have to do this and take out the RB oil adapter, but I don't really find the stock location all that bad.
Oh, I like that black one!
Might have to do this and take out the RB oil adapter, but I don't really find the stock location all that bad.
Last edited by Mazurfer; 06-25-2010 at 02:30 PM.
#22
When installing the turbo and deciding to use the filter adapter for the feed line, that was a major pain in my ***.
Now I just have to decide where to mount it and if it's worth it at the time being...hmmm. Thinks with head