Bindon

Ok guys,

I need help sourcing the 5 pin and 7 pin plastic harness plugs that go into the MAF and the throttle body. Anyone know where I can get these?

-Bryan

Go48

I doubt if you can purchase just the connectors from Mazda. In which case you would have to do a little detective work to determine the manufacturer and one of their vendors. Then you might have a problem convincing a wholesale vendor to sell you a few connectors. Anyway, try Mazmart (http://www.mazmart.com/) for a used wiring set with the connectors.

swoope

iTrader: (5)

bindon,

you also might pm overload.... i know he has some connections in connections..

beers

Bindon

Cool.

We need new plugs, and mazda only sells full harnesses. We need to find the actual maker of the plugs, im thinking its kawaseki, but im not sure.

Charles R. Hill

iTrader: (7)

I know that Canzoomer had some difficulty, but was successful, in sourcing the ECU plugs from Tyco. I tried the same thing to help TeamRX8 source some ignition coil connectors, but to no avail. I know that Mitsubishi makes the MAF sensor(which I think is 4-wire) so they may be a place to start asking questions, but I don't yet know who makes the throttle ***'y. That is a 6-wire connector. AMP also makes plugs/connectors for a variety of purposes.

CRH