Mechanic Shop Referral
#1
Registered
Thread Starter
Join Date: Jun 2007
Location: Tustin, Corona
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Mechanic Shop Referral
I need help finding a local shop or any garage pro's here that can install the following items for me. (Irvine CA - 92612)
· Complete Clutch Kit
· Complete Clutch Pedal Assembly
· Clutch Master/Slave Cylinder
· Exterior Door Handle Rubber Button
· New car battery
· Coolant Reservoir
· Starter
I purchased all the parts new and although a hand full of these I can do myself, I'd rather just get a good deal and pay someone to do it all. My life is a little too busy/hectic at the moment and my car can barely hang on. So I'd like to get this done ASAP.
Any referrals to a good shop or to anyone here that would like to make some money on the side, I'm all ears.
Thanks
Rocky
· Complete Clutch Kit
· Complete Clutch Pedal Assembly
· Clutch Master/Slave Cylinder
· Exterior Door Handle Rubber Button
· New car battery
· Coolant Reservoir
· Starter
I purchased all the parts new and although a hand full of these I can do myself, I'd rather just get a good deal and pay someone to do it all. My life is a little too busy/hectic at the moment and my car can barely hang on. So I'd like to get this done ASAP.
Any referrals to a good shop or to anyone here that would like to make some money on the side, I'm all ears.
Thanks
Rocky
#2
Rotary Evolution
#5
Registered
Thread Starter
Join Date: Jun 2007
Location: Tustin, Corona
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Just as an FYI for those that may care....
Neptune offered $660
Project Import offered $700
Rotary Reliability offered $800
2 mazda dealerships offered $1300 (Insane)
Unfortunately both Neptune / Project were too busy to get it done for me sooner. I would have to wait at least 5-10 days before bringing my car in.
So I went with Rotary Reliability (Santa Ana) and dealt with Nick directly. I'm getting all that work done plus installing my rear break pads. Again a lot of DIY situations, but I'm paying for convenience in a pinch.
I'll follow up after to rate the service / quality of work.
Thanks again peeps for the quick recommendations.
Neptune offered $660
Project Import offered $700
Rotary Reliability offered $800
2 mazda dealerships offered $1300 (Insane)
Unfortunately both Neptune / Project were too busy to get it done for me sooner. I would have to wait at least 5-10 days before bringing my car in.
So I went with Rotary Reliability (Santa Ana) and dealt with Nick directly. I'm getting all that work done plus installing my rear break pads. Again a lot of DIY situations, but I'm paying for convenience in a pinch.
I'll follow up after to rate the service / quality of work.
Thanks again peeps for the quick recommendations.
#6
Rotary Evolution
i generally refer the 7 owners in that area to RR+R as i haven't heard much about them with 8's but a clutch job isn't an overly complicated task on these cars.
#8
Registered
Thread Starter
Join Date: Jun 2007
Location: Tustin, Corona
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I got my car back as expected. I also got all the replaced parts back which I appreciate. Nick and his team did a good job.
*** UPDATE 01-27-13 ***
I spoke too soon. I left for a business trip and didnt get a chance to carefully analyze the state of my car.
All the major pieces so far are working however we have some bad side effects.
1) My door panel was not reconstructed properly. My corner window speaker is falling off and the window seal is not lined up right
2) For some reason now, my AC motor is not firing up when I turn the AC on. Button light works but nothing starts, no cold air
* this was not broken when I dropped it off... now its not working. I hope its a simple fix for them.
3) Cooling fan now sounds like a damn lawn mower when before it was just a normal sounding fan turning on to cool my car.
Since they had to replace my radiator, I'm wondering if they didn't re install everything properly/tightly.
I'm dropping it off Monday (01-28) for another inspection. All I want is a working car. I hope this is not the trend for this shop.
*** UPDATE 01-27-13 ***
I spoke too soon. I left for a business trip and didnt get a chance to carefully analyze the state of my car.
All the major pieces so far are working however we have some bad side effects.
1) My door panel was not reconstructed properly. My corner window speaker is falling off and the window seal is not lined up right
2) For some reason now, my AC motor is not firing up when I turn the AC on. Button light works but nothing starts, no cold air
* this was not broken when I dropped it off... now its not working. I hope its a simple fix for them.
3) Cooling fan now sounds like a damn lawn mower when before it was just a normal sounding fan turning on to cool my car.
Since they had to replace my radiator, I'm wondering if they didn't re install everything properly/tightly.
I'm dropping it off Monday (01-28) for another inspection. All I want is a working car. I hope this is not the trend for this shop.
Last edited by rq1rx8; 01-27-2013 at 12:56 PM.
#9
Registered
Thread Starter
Join Date: Jun 2007
Location: Tustin, Corona
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
#10
the more things change
my clutch went out while visiting in vegas
i was the only car worked on starting that
morning, my car was not finished until
9 p.m. that night. very long day
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM