Mazsports coolant mod help
#1
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2004
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Mazsports coolant mod help
I just recieved this as a Christmas gift and seem to have trouble with the directions........ Has anyone installed it and took the time to takes pics that would direct me on the route to installing it? Anything would help.
Thanks in advance
Sam
Thanks in advance
Sam
#3
scott's directions are pretty clear. You just cut the coolant hose at the 90 degree bend, put the barb part in, then hook up the ground wire. The other end goes into the fuse box (far right side of the car in a black plastic box) and replaces the OEM fan fuses.
#6
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2004
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by olddragger
Its not Christmas yet!
OD
OD
The one thing im not sure on is the location of the coolant hose. Is any coolant going to leak out when I cut the hose?
Sam
#7
He's as bad as Can
Originally Posted by HERO
We gave out secret santa gifts a little bit early this year haha.
The one thing im not sure on is the location of the coolant hose. Is any coolant going to leak out when I cut the hose?
Sam
The one thing im not sure on is the location of the coolant hose. Is any coolant going to leak out when I cut the hose?
Sam
#11
Zoom-Freakin'-Zoom
iTrader: (5)
Originally Posted by mysql101
My car was cold, and I didn't notice any coolant come out. Just have a washcloth handy when you do the initial cuts.
Here's the finished product:
Here's the finished product:
same here, cold car=no pressure= no coolant. it does not get much more simple than this mod...
enjoy..
beers
#12
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2004
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Installed everything! Took about 15 minutes. Really straightforward. Thanks again for the quick help guys. So, how do we know it's doing what it should be? I don't have any type of scanner to check temps and whatnot
Sam
Sam
Thread
Thread Starter
Forum
Replies
Last Post
gwailo
New Member Forum
30
06-07-2020 12:21 PM