Ideas for a BOV recirculate fitting?
#1
Finally Boosted!!!!!!!
Thread Starter
Ideas for a BOV recirculate fitting?
I am thinking about trying to recirculate my BOV and I am looking for ideas on how to attach a 1" silicone hose to the silicone 90 that is between my MAF and my turbo in this picture. I would like as little of an airflow restriction as possible. Any ideas would be greatly appreciated and links to the parts would be even better. Thanks!!!
#3
not much space there, but you might be able to squeeze in a metal 90 elbow and tap into that...
http://www.atpturbo.com/Merchant2/me...egory_Code=PPB
if not, you might also be able to get a one off made that has a 90 elbow coupler with a 1" hose coming out of it. my friend with an audi s4 has silicone hoses that look like that.
http://www.atpturbo.com/Merchant2/me...egory_Code=PPB
if not, you might also be able to get a one off made that has a 90 elbow coupler with a 1" hose coming out of it. my friend with an audi s4 has silicone hoses that look like that.
#5
Nope
iTrader: (9)
I would first flip the BOV around 180 degrees so it's facing the back of the engine compartment. The SSV is held in place with a PITA snap ring so that's easy enough to do, you don't have to worry about bolts lining up and such.
Then a metal pipe like Jason suggested would probably be the best bet.
Then a metal pipe like Jason suggested would probably be the best bet.
#6
and ceramic coat those pipes...
today I'm going to try out the duplicolor spray paints that have ceramic in it. Ceramic paint and ceramic enamel .. worse case I wasted $15 for 3 cans of the stuff.
today I'm going to try out the duplicolor spray paints that have ceramic in it. Ceramic paint and ceramic enamel .. worse case I wasted $15 for 3 cans of the stuff.
#7
...I'm SOOO Off Topic
yeah, deff turn it 180degrees, lol
mine goes 180 degrees back, around, loopty-loop and down, lol
(camera phone pic)
but it gets the job done.
I would really look into a 90 degree silicone hose with a 1" tapping on it. Im sure somebody makes one.
mine goes 180 degrees back, around, loopty-loop and down, lol
(camera phone pic)
but it gets the job done.
I would really look into a 90 degree silicone hose with a 1" tapping on it. Im sure somebody makes one.
#8
The Professor
#11
Finally Boosted!!!!!!!
Thread Starter
Thanks for the suggestions. I have something similar to what Static suggested but it will be a while before I get to install anything. Take a look...
https://www.rx8club.com/showpost.php...&postcount=322
https://www.rx8club.com/showpost.php...&postcount=322
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM
nferguson88
RX-8 Parts For Sale/Wanted
1
10-06-2015 12:45 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM