Stock all the way. Not even polishing or anything just a good cleaning. Car ran good and smooth so I just want that feeling again . My rx3 is going to have more than enough performance once I'm done I wont need 2 cars with performance .

Thanks man .. And yes garage is my second home I miss my previous garage it was 2 car length it was nice and roomy . My next house I'm buying with no garage extra room but with some acres to build a MAN CAVE 2.5 garage with garage door in each side .

Aren't you in FL? Pettit Racing sells their premix (Protek-R) by the gallon, lol ($50 I believe). That's what I've been using. People swear by the Idemitsu. So I guess either one would be ok. I think the Protek-R is synthetic too, so it might not be that much different. I don't really know, and people argue over these things all day long!!

I hear you. I don't have a place to work on cars anymore, which sux since I have two (the 8 and a truck).

So each time I need to do something I have to haul *** to a friend's house. Very frustrating and inconvenient

^ I've seen Pettit stuff maybe since they kinda local and never been their once car is running I may shut their , and I was with out a garage about 4 months while they fix my place up and wow talk about depress lol..


And ive seen this from other members ,, what you guys think looks like it may work , make sense and I cold just buy stock thermostat and this mod.

http://www.rx8performance.com/produc...an-control-kit

what do you want that for, open tthe loop for the 2nd radiator? I would say becuse you are way down south like I am just do without and leave it open all the time

Leave what open the thermostat. ? If so I dont want to worry about the cold weather when it comes a few times a year and have to put my thermostat back on.

why do you want another fan control? would you use it for a 2nd radiator fan?

I thought the one from Rx8 performance Was a replacement from original relay so all is doing is turning fan on earlier and keeping it fan on longer.

Well I havent done Nothing to car In weeks But Moved it since wife got mad that car is at her spot so I moved it to the side today , And ordered new OEM side seals for my rotors, They should be here Friday since they coming from California and Georgia, Im taking my Rotor bearing to My mechanic to inspect it one more time if I need im ordering new rotor bearing Wed, Bummer but o well I want it done right,

wife always wins

looks like things are staring to come together...good luck!

Thanks !. Yea she flipped when she saw my receipt I always hide them lol. Yea maybe in 2 weeks it be running .

....oh well

Can i use this housing and rotor please suggest me..

See on the second picture theirs a crack on it check how bad it is then make your call 1st one see how bad your wear is on it , if you don't know have someone good check it out since that is the life of your future build .

first I would say just start a thread man, its really easy and you get much better feedback

second....what did you use to clean the rotor? I hope it was light brass brush?

thrid, just assemble it and see how it goes.....there are sooooooo many possiblities you will never get enough info just asking....wait wait....I forgot what forum I was on....you will get tons of feedback

^ :-) yep so true

I use 300 sand paper and kerosene to clean the rotor...

*sigh*

retard, is retarded.

You should of used a grinder .. jk jk lmao no Bro well is too late now but stop what you doing and start a thread and ask what's next or just read peoples thread or ask check out peoples rebuilds, Bro I've had my car since Feb and I'm barely ordering my Rotor Bearing tomorrow , I was not sure till today I wanted it replaced my choice. So just check here and their take your time . I messes around Hondas and old school toyotas and rotary is different to a point . But like everything if you do it right the first time you do it once. Well we all hope.

Got my new rotor bearings from Mazda , and picked a new tool box up since needed more room for delicate parts , taking my flywheel to get cut and my bearings to get press maybe Friday will see . O and if you can see the real important parts came from Mazda ,

I can't wait to get my Rx8 finish to start back on my real Love , this picture was about 4 years ago.

oh boy, what are you going to do when she eventually finds out how much you really spent on that engine!!

hard to tell from the pic. Have you measured for tolerances on the housings? Since you are in trouble with the wife already, you might as well spend more money and get new housings

I like the speakers and radio in that tool box

^ lol I think little by little she knows how much but I've kept her happy spoiling her here and their , nothing compare to what I've wasted but she forgets lol,

No I haven't measured anything I'm sure it will be fine , car started and ran good just weak compression and very dirty apex seal grooves, so now with this rebuilt it will be all good, well I hope and nope I won't get housing hell no cant afford it bro , to tell you truth if I've would of listen to my wife I would of had a 3 rotor build installed in my rx3 buy now with what I've spend on rx8 buying car, trip and parts.

And yea tool box is kick *** it actually sounds real good now I can't get rid of my antique radio , this cd players comes with USB for my iPod, so cool

looking good man, I would get a feeler guage and calipers at the least and just make sure you are not setting yourself up for premature failure. cheap, easy and good comfort!

keep us posted

^ yea you right I thought about it , my builder will check it for me . I'm just worry most about the break in process on all the new bearings over anything else . I'm going to see if they can press them today .

Problem is that living in Florida a lot of family and friends come over for vacation and their goes my days working on car. Seriously about a month straight or more every other weekeend someone comes down for vacation. Nice but man I need to finish my car .