Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Exhaust Sounds too Raspy

Old Mar 17, 2011 | 08:34 PM
  #1  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
Exhaust Sounds too Raspy

Hi everyone,

A little bit about my BB rx8,

-AEM CAI with prefilter (for rain purposes)
-Exoticspeed Headers, 3in
-Exoticspeed midpipe, 3in (dual canisters)
-Mazdaspeed exhaust v1, not sure of pipe size

So onto my question/concern, recently i have installed my exoticspeed headers and the midpipe over 2 days. When i tested it out with all the parts listed above, i found that the exhaust sound was more raspy than i would have liked. i am not sure what is causing this and was wondering if anyone had any idea why it is so raspy or how to fix it?

here are two videos i made, sorry if the audio quality isn't good.

http://www.youtube.com/watch?v=zjuk1Du7ERQ

http://www.youtube.com/watch?v=4X_u7..._order&list=UL
Reply
Old Mar 17, 2011 | 08:46 PM
  #2  
jasonrxeight's Avatar
Registered
 
Joined: Jan 2010
Posts: 3,487
Likes: 3
From: Omaha, NE
try a different midpipe?
Reply
Old Mar 17, 2011 | 08:48 PM
  #3  
Razz1's Avatar
Mu ha.. ha...
 
Joined: Aug 2004
Posts: 14,361
Likes: 3
From: Cali
Two ways...

Poke a hole in the muffler

Resonator so it is quite.
Reply
Old Mar 17, 2011 | 11:09 PM
  #4  
Dirt_Nasty's Avatar
Filth in a world of Clean
iTrader: (2)
 
Joined: Mar 2010
Posts: 517
Likes: 0
From: Somewhere in 3rd gear
What is causing it is the fact that it is a rotary. A different mid-pipe and exhaust set-up will change it's tone and amount. BHR's mid-pipe, I am told, eliminates a lot of the rasp, but I have never heard one In person.
Reply
Old Mar 17, 2011 | 11:13 PM
  #5  
Brettus's Avatar
Boosted Kiwi
iTrader: (2)
 
Joined: Apr 2006
Posts: 20,853
Likes: 1,806
From: Y-cat-o NZ
A 3in system is going to be a lot harder to tone down than a 21/2 . You really need some decent resonators in the midpipe . The ones you have don't seem to be doing the job.
Reply
Old Mar 17, 2011 | 11:38 PM
  #6  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
I understand that it is a rotary and at first i didnt mind the raspiness but now its starting to get annoying cause its a loud raspiness.

could it be my catback exhaust making that raspiness?
Reply
Old Mar 18, 2011 | 12:19 AM
  #7  
mushkid's Avatar
Smile,It confuses people!
iTrader: (6)
 
Joined: Dec 2009
Posts: 402
Likes: 2
From: Miami (RiceVille)
try a racing beat or BHR midpipe
Reply
Old Mar 18, 2011 | 02:18 AM
  #8  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
where can i get a bhr midpipe?
Reply
Old Mar 18, 2011 | 02:20 AM
  #9  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
would people say that the bhr midpipe is better than the racing beat?

i have looked at video footage of both but the conditions were not the same and the audio was not the greatest.
Reply
Old Mar 18, 2011 | 02:44 AM
  #10  
zOMG-WAFFLEz's Avatar
Registered
 
Joined: Mar 2011
Posts: 36
Likes: 0
From: Santa Cruz, CA
ditch the catback, exoticspeed sounds delicious.
Reply
Old Mar 18, 2011 | 04:07 AM
  #11  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
They are different products Souhjah, RB's has 2 resonators to do the job while BHR's only uses one that has no packing inside so it won't wear out.
Both companies make great products, it comes down to a matter of preference.
Reply
Old Mar 18, 2011 | 02:26 PM
  #12  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
Bse50 - what do you mean packing? Could you explain?
Reply
Old Mar 18, 2011 | 05:28 PM
  #13  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
Google exhaust packing, it explains almost everything!
Reply
Old Mar 18, 2011 | 08:24 PM
  #14  
lilring's Avatar
Finally a MT
iTrader: (11)
 
Joined: Jun 2007
Posts: 1,276
Likes: 0
From: Nashville, TN
U have a Single Resonated midpipe forsale if you want it
Reply
Old Mar 19, 2011 | 07:14 AM
  #15  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
what is the make?
Reply
Old Mar 20, 2011 | 12:41 AM
  #16  
lilring's Avatar
Finally a MT
iTrader: (11)
 
Joined: Jun 2007
Posts: 1,276
Likes: 0
From: Nashville, TN
I had an Performance shop make it for me.. heres the link to it.. I decieded to go a different way on mine..
https://www.rx8club.com/rx-8-parts-sale-wanted-44/midpipe-tail-light-key-fob-212571/
Reply
Old Mar 21, 2011 | 12:08 AM
  #17  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
yeah right now im going to keep the exhaust set up i have now for a bit and see if i get used to it
Reply
Old Mar 21, 2011 | 10:11 AM
  #18  
lilring's Avatar
Finally a MT
iTrader: (11)
 
Joined: Jun 2007
Posts: 1,276
Likes: 0
From: Nashville, TN
OK, If something changes, Just keep me in mind. I can do OBO as well
Reply
Old Mar 29, 2011 | 08:31 PM
  #19  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
alright well i have an option at the moment, should i get the exoticspeed r1t catback or get a bhr midpipe?
Reply
Old Mar 29, 2011 | 08:32 PM
  #20  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
i can get the exoticspeed catback for 500 while trading my stock exhaust
Reply
Old Mar 29, 2011 | 10:25 PM
  #21  
azzuro's Avatar
So this Rotary thing...?
 
Joined: Nov 2009
Posts: 424
Likes: 0
From: Sherwood Park, AB
Mid-pipe is the source of your rasp. Headers don't really help.

Exoticspeed makes a fine catback, though.
Reply
Old Mar 29, 2011 | 10:26 PM
  #22  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
i have the mazdaspeed one though and can't tell which to get because i havent heard them in person
Reply
Old Mar 30, 2011 | 12:33 AM
  #23  
xexok's Avatar
Registered
 
Joined: Dec 2009
Posts: 2,100
Likes: 7
From: Aurora, CO
Souhjah have you been to any local meets? Chances are someone at those meets has one of the exhausts/midpipes your interested in. If your just wanting the rasp gone then go with the BHR midpipe as far as I know its the only one with no packing in the resonators so it should not develop a loud rasp over time like others do.
Reply
Old Mar 30, 2011 | 10:23 AM
  #24  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
No i haven't been to the meets i have been busy with school lately and i have no idea when the meets are in Vancouver, British Columbia, Canada
Reply
Old Mar 30, 2011 | 10:29 AM
  #25  
Souhjah's Avatar
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 89
Likes: 0
From: Vancouver, BC Canada
any other ideas?
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 11:07 AM.