Eibach Springs - Pro Kit
#1
Eibach Springs - Pro Kit
just like the title, yesterday I got the new spring on my 8...but...
The rear is lowered as expected
The FRONT is "RAISED" even higher than stock...
Help...did someone experienced it the same way?
and how to make it right...
The rear is lowered as expected
The FRONT is "RAISED" even higher than stock...
Help...did someone experienced it the same way?
and how to make it right...
#2
I made some poos
iTrader: (1)
Join Date: Sep 2005
Location: Pittsburgh, PA
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Turn your wheels all the way to the left. Loosen the upper a-arm bolts that you can reach. There are 2 on each side (17mm). Once you loosen the 2 bolts you can reach, turn your wheels to the right and loosen the other 2 bolts. DO NOT REMOVE THE BOLTS. Just loosen them a little to take the tension off the bushings. Drive the car forward at least a few feet and drive it back a few feet. Do that a couple of times, then push the front of the car up and down a few times.
Tighten the bolts back up and the car should be significantly lower. Search the site for preloading for more info.
Tighten the bolts back up and the car should be significantly lower. Search the site for preloading for more info.
#3
Zoom-Freakin'-Zoom
iTrader: (5)
Turn your wheels all the way to the left. Loosen the upper a-arm bolts that you can reach. There are 2 on each side (17mm). Once you loosen the 2 bolts you can reach, turn your wheels to the right and loosen the other 2 bolts. DO NOT REMOVE THE BOLTS. Just loosen them a little to take the tension off the bushings. Drive the car forward at least a few feet and drive it back a few feet. Do that a couple of times, then push the front of the car up and down a few times.
Tighten the bolts back up and the car should be significantly lower. Search the site for preloading for more info.
Tighten the bolts back up and the car should be significantly lower. Search the site for preloading for more info.
https://www.rx8club.com/canada-forum-35/eibach-springs-pro-kit-171725/
beers
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM