Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Building a 3-rotor 13B, possible?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-27-2021, 08:52 AM
  #76  
Registered
 
WankeyYankey's Avatar
 
Join Date: Feb 2019
Posts: 37
Received 2 Likes on 2 Posts
Originally Posted by peloponisios
So, even Rob Dahm bulit a 3 rotor but not a 3 rotor Renesis. That must tell you something.
As far as the old members scaring away new people, I don't agree. A handful of old members are keeping this and the rx7club alive. People come and go, but those few persist. And along with their help and input, we can try to keep our rotaries going. It is indeed a dying breed. So let's savor and honor what we have. Anyway be well everybody.
lots of respect for you and this reply, no insults or rude remarks, just stating your opinion in a polite manner, beautiful. If only we could all act this way on the forum, it might have more traffic and rx8s as well as rotaries in general might have a better understanding from the public and likely a ton more support. Granted I will admit there’s members on the forum who have been nothing but helpful, and I’m well aware there have been newbs who come and ask dumb questions or repeat questions then act rude or ignore what older members say and I can totally understand why that can be irritating. However, assuming everyone who comes in and asks a question that you’ve heard before is just lazy and arrogant is just rude and it doesn’t help anyone. On another side note this site isn’t exactly the easiest to find the exact information you’re looking for. Please don’t flame me as yes I’m aware of the series 1 tech and whatnot but lookin through 8 pages of comments to find a picture of the spark plug wiring, only to find the picture is 10 years old and doesn’t even load right isn’t fun and can be frustrating enough to just type in a new question.
Old 05-30-2021, 05:47 PM
  #77  
No respecter of malarkey
iTrader: (25)
 
TeamRX8's Avatar
 
Join Date: Apr 2005
Posts: 26,752
Received 2,025 Likes on 1,649 Posts
despite my mentioning it multiple times you never once inquired about where the proper threads are, or anything else for that matter, which would be worthy of respect, and of which I would have gladly shared with you. Yet the criticism comes as easily to you as being offended, while having a blind eye to your self; failing to recognize your own contentious attitude, bullheadedness, and refusal to admit an all around lack of understanding on the subject. Multiple times.

Not everyone is treated this way, often just the people who respond as yourself. You just walked in the door and it’s been 16 years for me. Where was my respect and where was the politeness towards me before you engaged in an argument about something you know little to nothing about? You want to jump right in and run with the big dogs and then yelp on and on over the slightest nip. The refusal to accept your place in the order of things is only exceeded by the refusal to accept your own blame as well.

It’s gone the exact opposite way with others. Maybe you should ask yourself why that is?





Old 05-31-2021, 09:10 PM
  #78  
Registered
 
WankeyYankey's Avatar
 
Join Date: Feb 2019
Posts: 37
Received 2 Likes on 2 Posts
*iNsULt InSuLt* “yOu DoNt rEaD, I SeD tHis *INSERT BOOMER MEME*

“yOuR jUsT iGnOraNt aNd nAiVe”
iM JuST rEaL”
Old 05-31-2021, 09:18 PM
  #79  
Registered
 
WankeyYankey's Avatar
 
Join Date: Feb 2019
Posts: 37
Received 2 Likes on 2 Posts
Originally Posted by TeamRX8
despite my mentioning it multiple times you never once inquired about where the proper threads are, or anything else for that matter, which would be worthy of respect, and of which I would have gladly shared with you. Yet the criticism comes as easily to you as being offended, while having a blind eye to your self; failing to recognize your own contentious attitude, bullheadedness, and refusal to admit an all around lack of understanding on the subject. Multiple times.

Not everyone is treated this way, often just the people who respond as yourself. You just walked in the door and it’s been 16 years for me. Where was my respect and where was the politeness towards me before you engaged in an argument about something you know little to nothing about? You want to jump right in and run with the big dogs and then yelp on and on over the slightest nip. The refusal to accept your place in the order of things is only exceeded by the refusal to accept your own blame as well.

It’s gone the exact opposite way with others. Maybe you should ask yourself why that is?



I mean if you look back in the thread someone posted a question and everyone except you has just been talking about it and contributing meanwhile you just recommend we go somewhere else as if confining it to it’s own thread wasn’t enough...
maybe you forgot you can unsubscribe? Literally just Ignoring it would take even less effort than that and no one would care. Or again tell me how I’m no listening and I’m wasting my time and staying in denial of every thruth you so desperately try to explain to me, I can ignore it all day.
Old 05-31-2021, 10:26 PM
  #80  
No respecter of malarkey
iTrader: (25)
 
TeamRX8's Avatar
 
Join Date: Apr 2005
Posts: 26,752
Received 2,025 Likes on 1,649 Posts
Originally Posted by WankeyYankey
*iNsULt InSuLt* “yOu DoNt rEaD, I SeD tHis *INSERT BOOMER MEME*

“yOuR jUsT iGnOraNt aNd nAiVe”
iM JuST rEaL”

again, the thread you claim is on target until I showed up is from 2006 and has zero relevance to the topic as it exists today.

.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
iman08lol
New Member Forum
9
04-28-2014 02:08 PM
joshk118
Series I Tech Garage
8
04-30-2006 04:10 PM
devious12
Series I Major Horsepower Upgrades
22
07-25-2005 05:25 PM
shawnio
Series I Tech Garage
12
04-30-2004 11:38 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Building a 3-rotor 13B, possible?



All times are GMT -5. The time now is 02:56 PM.