Turblown vs Petit SC II (AUTO)
#27
Administrator
iTrader: (7)
Phil's SC'd 8 isn't quite at 300. Yet.
#30
Time for boost...
iTrader: (24)
fanboi? Right.
You obviously have ZERO experience with your car. You probably regret the purchase, but are too far into it to give it up.
I was trying to give you advice, but now you just seem like a numpty kid who wants a better car than the one he's stuck with. Auto to Manual swap? Good luck.
Enjoy your "crappy car". When it blows, hopefully you'll get rid of it and buy a civic
You obviously have ZERO experience with your car. You probably regret the purchase, but are too far into it to give it up.
I was trying to give you advice, but now you just seem like a numpty kid who wants a better car than the one he's stuck with. Auto to Manual swap? Good luck.
Enjoy your "crappy car". When it blows, hopefully you'll get rid of it and buy a civic
#31
For the sub'd. Car is finished and running, just waiting for MM to fly to SoCal to tune. If not, I won't have dyno results for at least six months as the car will sit or change ECUs from Cobb to something more user friendly and less controlled by MM
Some comments on the forum are already wrong as there are 4 port autos over 300. I'll send private messages to some of the sub'd with dyno results and keep off the forum.
Thanks
Some comments on the forum are already wrong as there are 4 port autos over 300. I'll send private messages to some of the sub'd with dyno results and keep off the forum.
Thanks
#32
SARX Legend
iTrader: (46)
For the sub'd. Car is finished and running, just waiting for MM to fly to SoCal to tune. If not, I won't have dyno results for at least six months as the car will sit or change ECUs from Cobb to something more user friendly and less controlled by MM
Some comments on the forum are already wrong as there are 4 port autos over 300. I'll send private messages to some of the sub'd with dyno results and keep off the forum.
Thanks
Some comments on the forum are already wrong as there are 4 port autos over 300. I'll send private messages to some of the sub'd with dyno results and keep off the forum.
Thanks
As for the 300WHP four port comment, put up or shut up. By reading your last few posts it's pretty obvious you don't know a whole lot.
Last edited by 9krpmrx8; 01-06-2012 at 07:45 PM.
#33
The Cobb is not an ECU, it's just a flash device and datalogger/code reader. And the Cobb Access port itself is very user friendly, you just have to know what you are doing when using the Cobb ATR software to tune. Even if you went with a stand alone ECU you would still need a tuner. MM is not the only person who can tune using a Cobb either, FYI. But he is great at it and would be your most logical choice.
As for the 300WHP four port comment, put up or shut up. By reading your last few posts it's pretty obvious you don't know a whole lot.
As for the 300WHP four port comment, put up or shut up. By reading your last few posts it's pretty obvious you don't know a whole lot.
I'm simply stating that the others who post their opinion as fact are wrong. Sorry I won't be posting my own personal numbers for you to see or arguing with you further.
Ofcourse Jeff at MM is not the only person who can tune, but he almost seems to control the Cobb market. I called Cobb support and the only support they provided was to call MM who ofcourse flat out said he won't respond to phone, text or email. Pluss, his tuning days are only once or twice a month and on work days for a few hours only. That is the kind of support you get when you buy Cobb. Being new, not a lot of "other tuners" have base maps making tunning take a lot longer and cost more money. Forget using MM base maps for those are password protected for some reason. Not bashing MM, I think Cobb being new has some fault and I think MM provides one of the best services, the fly to destination, live tunning, unforunately, this should have been my first choice as the remote tunning and support is not very flexible.
I took the car to another shop who said they know Cobb and 5 hours later at $150/hour said they can't figure it out. Some other issue with Cobb not sending commands to the ECU.
Anyways getting to the Turblown vs Petite topic back on track, I'd like to give good recommendations for the turblown kit. He fits all parts on an Rx8 before shipping to ensure proper fitment pluss he supports his product 100% and was available every day over instant message. The car is now running with this kit in under 30 days since purchasing the kit online. This included custom fabricating all parts and having a friend do the install after work.
Last edited by von; 01-06-2012 at 09:50 PM.
#35
SARX Legend
iTrader: (46)
Ofcourse Jeff at MM is not the only person who can tune, but he almost seems to control the Cobb market. I called Cobb support and the only support they provided was to call MM who ofcourse flat out said he won't respond to phone, text or email. Pluss, his tuning days are only once or twice a month and on work days for a few hours only. That is the kind of support you get when you buy Cobb. Being new, not a lot of "other tuners" have base maps making tunning take a lot longer and cost more money. Forget using MM base maps for those are password protected for some reason. Not bashing MM, I think Cobb being new has some fault and I think MM provides one of the best services, the fly to destination, live tunning, unforunately, this should have been my first choice as the remote tunning and support is not very flexible.
Anyways getting to the Turblown vs Petite topic back on track, I'd like to give good recommendations for the turblown kit. He fits all parts on an Rx8 before shipping to ensure proper fitment pluss he supports his product 100% and was available every day over instant message. The car is now running with this kit in under 30 days since purchasing the kit online. This included custom fabricating all parts and having a friend do the install after work.
Last edited by 9krpmrx8; 01-07-2012 at 01:10 AM.
#36
I 100% agree with 9K. If your gonna spend **** load of money + w/e tuning and not willing to show off your dyno numbers, somethin is wrong. If I could put down 300 whp thats bragging rights. It puts your ride off from others. Not a typical rx8 but originality and personality is what I respect.
#37
Registered
iTrader: (3)
yall give the guy a break---he came on the forum with a simple question--he got some good advice and proceeded. He admits he doesnt know how to do things himself, yet he is willing to pay for good services. Yea he made a statement that he will make 300 rwhp with an AT car. Turblown backed him up on that. He doesnt have to prove anything to anybody.
If yall dont believe you can get 300 rwhp from a 4 port engine, make it worth my while and hell i will do it! And it will be as reliable as any FI rx8.
Sorry to go on about this---i just remember when I first came in and how much I had to learn, and still am after over 8 years of messing with it. Yall are making good points and I think he gets it. So lets see what happens?
If yall dont believe you can get 300 rwhp from a 4 port engine, make it worth my while and hell i will do it! And it will be as reliable as any FI rx8.
Sorry to go on about this---i just remember when I first came in and how much I had to learn, and still am after over 8 years of messing with it. Yall are making good points and I think he gets it. So lets see what happens?
#38
yall give the guy a break---he came on the forum with a simple question--he got some good advice and proceeded. He admits he doesnt know how to do things himself, yet he is willing to pay for good services. Yea he made a statement that he will make 300 rwhp with an AT car. Turblown backed him up on that. He doesnt have to prove anything to anybody.
If yall dont believe you can get 300 rwhp from a 4 port engine, make it worth my while and hell i will do it! And it will be as reliable as any FI rx8.
Sorry to go on about this---i just remember when I first came in and how much I had to learn, and still am after over 8 years of messing with it. Yall are making good points and I think he gets it. So lets see what happens?
If yall dont believe you can get 300 rwhp from a 4 port engine, make it worth my while and hell i will do it! And it will be as reliable as any FI rx8.
Sorry to go on about this---i just remember when I first came in and how much I had to learn, and still am after over 8 years of messing with it. Yall are making good points and I think he gets it. So lets see what happens?
Last edited by von; 01-07-2012 at 10:29 AM.
#40
SARX Legend
iTrader: (46)
Thanks, 9k sounds like he wants to fight somebody haha. I don't remember saying I made 300rwp but whatever. And once MM dyno tunes my car, I won't be posting results no matter what horsepower. I'm just using the forum for information, not friends, bragging rights or social networking. Some statements that 9k and others said like having to comprehend all information regarding a turbo before professionals install one on my car makes me feel like I'm living in a fast and furious movie. The comments are as obscure as not double clutching.
#41
Registered
iTrader: (3)
von--9K has some good points and it actually trying to help in his own way. He is actually a good guy.
You see--with this unique car once FI is professionally installed and tuned the owner still needs to have a great understanding of what is going on. This is a temperamental engine to add FI too. It's not one that you can just get done and then drive it with no problems. Yep FI can be done and made pretty reliable BUT, the owner needs to be aware of some warning signs of problems as they are going to come. And if the owner is not aware of these and the probable cause, then a catastrophic event could occur. We would hate to see that.
You sound like a very intelligent guy thats willing to do what is needed. A lot of good info is on this forum and believe it or not no one on this forum whats to see you have problems with your car.
You are certainly off to a good start with a solid build. Keep us posted. Glad to see another AT car get boosted.
OD
You see--with this unique car once FI is professionally installed and tuned the owner still needs to have a great understanding of what is going on. This is a temperamental engine to add FI too. It's not one that you can just get done and then drive it with no problems. Yep FI can be done and made pretty reliable BUT, the owner needs to be aware of some warning signs of problems as they are going to come. And if the owner is not aware of these and the probable cause, then a catastrophic event could occur. We would hate to see that.
You sound like a very intelligent guy thats willing to do what is needed. A lot of good info is on this forum and believe it or not no one on this forum whats to see you have problems with your car.
You are certainly off to a good start with a solid build. Keep us posted. Glad to see another AT car get boosted.
OD
#42
Good luck with your build, don't worry about what these guys say but knowledge is power! Seriosly though just post the numbers up, I'll be surprised if you get 300 hp, just my opinion though.
#43
No respecter of malarkey
iTrader: (25)
#45