slavearm's mazsport turbo kit dyno
10-31-2006, 01:51 PM
#126
Riot Controller
Join Date: Jan 2004
Location: Orlando, FL
Posts: 2,142
Likes: 0
Received 0 Likes
on
0 Posts
if you could get yourself a hollow block of aluminum, you could always just tap some holes into it an screw in some threaded, barbed nipples to attach the lines to. although i dont recall the GE manifold to be that expensive.
10-31-2006, 02:42 PM
#127
RAWR!@#
Join Date: Nov 2005
Location: NJ
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by guitarjunkie28
i installed the mazsport turbo kit on shane's rx8 over the last few days and scott was out here and tuned it.. at least as much as he had time for anyway. we're all hoping to get back to the dyno tomorrow for some more impressive numbers.
base run was at 6psi, untuned... forgot to print that sheet, but it was something like 286whp.
he got it to 304 whp tonight @ 8psi. a/f was nice, but the timing was SO conservative, i don't think you'd ever have to worry about this thing blowing up...serious man, this was a CONSERVATIVE tune! i saw it for myself.
we're all exhausted, and i've got to get back to work. so here's a teaser sheet, and hopefully we'll have something more betterer tomorrow
how often do you see a turbo car keep making power past 8k? that's the ****!
base run was at 6psi, untuned... forgot to print that sheet, but it was something like 286whp.
he got it to 304 whp tonight @ 8psi. a/f was nice, but the timing was SO conservative, i don't think you'd ever have to worry about this thing blowing up...serious man, this was a CONSERVATIVE tune! i saw it for myself.
we're all exhausted, and i've got to get back to work. so here's a teaser sheet, and hopefully we'll have something more betterer tomorrow
how often do you see a turbo car keep making power past 8k? that's the ****!
10-31-2006, 03:48 PM
#129
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by epitrochoid
if you could get yourself a hollow block of aluminum, you could always just tap some holes into it an screw in some threaded, barbed nipples to attach the lines to. although i dont recall the GE manifold to be that expensive.
Ordered the GE Manifold. Not very expensive even anodized. The fittings cost as much as the manifold actually.
Where'd your tq go?
199 @ 6PSI
255@12PSI (this number will go up when my HKS comes in)
10-31-2006, 03:55 PM
#130
Riot Controller
Join Date: Jan 2004
Location: Orlando, FL
Posts: 2,142
Likes: 0
Received 0 Likes
on
0 Posts
worth mentioning that those tq/psi number are about the same as the greddy kit (I hit 200 and 230 at 6 and 9 psi respectively)..
except you get to ride it all the way to 9 grand land
except you get to ride it all the way to 9 grand land
10-31-2006, 03:57 PM
#131
Its all about Style...
Join Date: May 2006
Location: South of Boston, MA
Posts: 3,337
Likes: 0
Received 0 Likes
on
0 Posts
I think I need to go find some rich fat chic to marry so I can be one of the first in the New England area to own this kit 
Would marring the girl just for her money to buy the kit make me a bad person???
Congrats on this kit btw, I've been leaning torwards a S/C but damn the numbers your getting and being "Conservitive" is making my eyes do double takes.
Would marring the girl just for her money to buy the kit make me a bad person???
Congrats on this kit btw, I've been leaning torwards a S/C but damn the numbers your getting and being "Conservitive" is making my eyes do double takes.
10-31-2006, 04:45 PM
#132
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Clavius
I think I need to go find some rich fat chic to marry so I can be one of the first in the New England area to own this kit
Would marring the girl just for her money to buy the kit make me a bad person???
Would marring the girl just for her money to buy the kit make me a bad person???
10-31-2006, 08:40 PM
#135
Registered User
Join Date: Mar 2003
Location: Austin, Tx
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by epitrochoid
This is a nice...a favorite of the honda boys:
http://www.goldeneaglemfg.com/faq.html (click at the very bottom
http://www.goldeneaglemfg.com/faq.html (click at the very bottom
11-01-2006, 05:01 AM
#136
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
oh ****... i just remembered kieth from kg sells fuel rail by the foot... he anodizes them too. i could have tapped as many or few holes as we needed. my bad.
Last edited by guitarjunkie28; 11-01-2006 at 05:12 AM.
11-01-2006, 06:57 AM
#137
Originally Posted by Clavius
I think I need to go find some rich fat chic to marry so I can be one of the first in the New England area to own this kit
Would marring the girl just for her money to buy the kit make me a bad person???
Congrats on this kit btw, I've been leaning torwards a S/C but damn the numbers your getting and being "Conservitive" is making my eyes do double takes.
Would marring the girl just for her money to buy the kit make me a bad person???
Congrats on this kit btw, I've been leaning torwards a S/C but damn the numbers your getting and being "Conservitive" is making my eyes do double takes.
*Dont quote me for that!*
11-01-2006, 08:24 AM
#138
Registered User
Join Date: Sep 2006
Location: Tampa FL
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
This is a complete kit and is currently ready for sale.
$7995 for type 1, air to air, T4 hybrid turbo, low turbo placement
$9995 for type 2, liquid to air, T4 hybrid turbo, top mounted
$8500 for type 3, air to air, T4 hybrid turbo, top mounted
and the type 4 will be coming down the road.... we joke that it is the kit your wife will never know about.....
liquid to air, T4 hybrid turbo, low mounted....can't see anything....
when Scott is back in Tampa we will dyno Type 2 and post those numbers. They took a detour to the Sema Show in Vegas.... The type 1 on Slavearm's 8 dyno'd at 335RWHP if i remember correctly. shane, could you please post that dyno chart for us?
these are all complete kits with fuel pump upgrades, primary and secondary fuel injectors and the interceptor-x included in the kit. All of the tubes are staineless steel and can be ceramic coated including the turbo and manifold for an additional charge.
thanks to everyone that helped us get that 8 dyno'd before sevenstock!!
$7995 for type 1, air to air, T4 hybrid turbo, low turbo placement
$9995 for type 2, liquid to air, T4 hybrid turbo, top mounted
$8500 for type 3, air to air, T4 hybrid turbo, top mounted
and the type 4 will be coming down the road.... we joke that it is the kit your wife will never know about.....
liquid to air, T4 hybrid turbo, low mounted....can't see anything....
when Scott is back in Tampa we will dyno Type 2 and post those numbers. They took a detour to the Sema Show in Vegas.... The type 1 on Slavearm's 8 dyno'd at 335RWHP if i remember correctly. shane, could you please post that dyno chart for us?
these are all complete kits with fuel pump upgrades, primary and secondary fuel injectors and the interceptor-x included in the kit. All of the tubes are staineless steel and can be ceramic coated including the turbo and manifold for an additional charge.
thanks to everyone that helped us get that 8 dyno'd before sevenstock!!
11-01-2006, 08:52 AM
#139
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Yah sure, but remember that dyno was on crappy gas and an extremely conservative tune, and a not very sparky spark plug.
Just have to wait till I get home, because Christy has the USB key with the actual dyno files.
Just have to wait till I get home, because Christy has the USB key with the actual dyno files.
11-01-2006, 09:10 AM
#140
Riot Controller
Join Date: Jan 2004
Location: Orlando, FL
Posts: 2,142
Likes: 0
Received 0 Likes
on
0 Posts
What options are available to those that already have the greddy/interceptor setup?
or more specific..those of us that already have the greddy, interceptor, and mazsport fuel pump and injector kits?
or more specific..those of us that already have the greddy, interceptor, and mazsport fuel pump and injector kits?
11-01-2006, 09:33 AM
#142
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Talk to Christy/Mantis, I seem to recall them telling people at sevenstock, that they would subtract the cost of the parts you already owned.
They are pretty fair.
They are pretty fair.
11-01-2006, 09:39 AM
#143
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slavearm
Yah sure, but remember that dyno was on crappy gas and an extremely conservative tune, and a not very sparky spark plug.
AND you have a catalytic converter, which i forgot to mention before. get rid of that and it'll bump the numbers up a bit.
11-01-2006, 09:39 AM
#144
Registered User
Join Date: Aug 2005
Location: Texas
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
*drools*
so what would you ESTIMATE you could get with the Type 1 with 93 octane gas (what we have here in texas), badass spark plugs, and moderatly conservative tune?
In all honest it doenst matter - because 330 to the wheels is PERFECT for me.
so what would you ESTIMATE you could get with the Type 1 with 93 octane gas (what we have here in texas), badass spark plugs, and moderatly conservative tune?
In all honest it doenst matter - because 330 to the wheels is PERFECT for me.
11-01-2006, 09:44 AM
#145
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
daily driven, 330-340 shouldn't be any sort of a problem with a conservative tune. add some alky injection, and you might be able to run upper 300's whp totally reliably.
11-01-2006, 09:48 AM
#146
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
I am thinking 350ish for my conservative tune at 12psi, maybe 370 or so at 14-15psi. Just keep in mind, it ships by default with a 5lb spring in the wastegate which will net you 6-8 PSI without a boost controller.
In all honesty, I think the kit is good for up to about 390-400, but you may run out of injector/turbo past that. Scott ships the setup with a nice streetable safe setup. Make sure you proceed with caution for anything beyond that. If you can, get some other int-x owners together and setup a tuning trip for Scott. It isn't that expensive, and Scott is one hell of a tuner.
In all honesty, I think the kit is good for up to about 390-400, but you may run out of injector/turbo past that. Scott ships the setup with a nice streetable safe setup. Make sure you proceed with caution for anything beyond that. If you can, get some other int-x owners together and setup a tuning trip for Scott. It isn't that expensive, and Scott is one hell of a tuner.
11-01-2006, 09:53 AM
#147
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
If I can talk RRR in Santa Ana to give me some discount dyno time, I might be ready in a week or so to do a run with 100 octane and upgraded ignition. BTW, RRR are good guys to work with. They really helped us out with the dyno, and they use a very accurate bung based WB02 instead of the typical tailpipe. Nick/Louie and team bent over backwards to help out, and kept the shop open late two nights in a row for us.
11-01-2006, 11:12 AM
#149
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slavearm
If I can talk RRR in Santa Ana to give me some discount dyno time, I might be ready in a week or so to do a run with 100 octane and upgraded ignition. BTW, RRR are good guys to work with. They really helped us out with the dyno, and they use a very accurate bung based WB02 instead of the typical tailpipe. Nick/Louie and team bent over backwards to help out, and kept the shop open late two nights in a row for us.
i don't want to push it too hard without the alcohol injection. we're gonna be running out of gas up top, and will probably have to use the alky to compensate for the mixture, not just the detonation prevention.
11-01-2006, 11:41 AM
#150
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
We can watch it, go up 500/1000rpms per pull and if the AFR starts creepin, we figured out where we have to stop. Scott was able to push I think close to 390 on 100 octane from the conversations I heard at SS9. I don't plan to run Meth long term, so I don't really want to buy a kit. If we can borrow one that would be great.