Project hardtimes/rx8
#26
is that a modest mouse reference in your user title btw?
Anyway saucey, have you picked up what oils to use with your turbo build? Those ports look cool, any front pics?
#27
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
No Im not sure just yet Ima going to the builder decide which is best because my very first was using royal purple when the second rear rotor failed and the second was penzoil. So what ever he feels that is best that what I'm goin to run with.
#32
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
They pics will be coming pretty soon as I make the hand off to El this coming week. im just ordering parts and what not so I can be ready for the next stage which is to turbocharge this thing. I will post pics when the engine is all put together.
As far as the turbo manifold I'm going to see if it is possible to have the top mount moved over to the left about and inch and push it back a little bit. I need to take a look at the ecu. There is a company that makes a harness that allows people to move the Ecu, ems to were ever they need it to be, I like to put in in the glove box.l myself and after all said and done get a full wire tuck done one the engine.
All I know this whip is going to be a beast..
As far as the turbo manifold I'm going to see if it is possible to have the top mount moved over to the left about and inch and push it back a little bit. I need to take a look at the ecu. There is a company that makes a harness that allows people to move the Ecu, ems to were ever they need it to be, I like to put in in the glove box.l myself and after all said and done get a full wire tuck done one the engine.
All I know this whip is going to be a beast..
#34
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Yes it was weird noise i had hurd a loud *** noise from the engine after that it was done deal. But I didnt notice when the engine gave out at both time it happens when I was barley taking off.
#36
Boostin'
Got a link to this harness adapter? Going to the glove-box sounds like a great idea. I can put the turbo where you want. We are getting things ready for assemble on monday. Photos to come. On a side note I just spoke with another Renesis owner we ported/built an engine for, over 8k miles running strong.
#37
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Here is the link for the company called boomslang for the wire harness.
http://www.boomslang.us/
I know the harness is made to spec the price starts off at $250 but 'm not sure how long it may need to be to reach guess i make some measurement when that comes around.
http://www.boomslang.us/
I know the harness is made to spec the price starts off at $250 but 'm not sure how long it may need to be to reach guess i make some measurement when that comes around.
Last edited by sauceyI986; 02-19-2011 at 03:36 PM.
#38
BearBlasterExtraordinair!
iTrader: (3)
True, but from the UOA's I've seen, oils shear off weight pretty quickly. Like within 1,000 miles. Most of the people that used 10w30 had it shear down to a 20 weight. So I'd rather have a heavier oil, that way when it does shear down, you still have protection.
#41
Gold Wheels FTW
iTrader: (1)
Here is the link for the company called boomslang for the wire harness.
http://www.boomslang.us/
I know the harness is made to spec the price starts off at $250 but 'm not sure how long it may need to be to reach guess i make some measurement when that comes around.
http://www.boomslang.us/
I know the harness is made to spec the price starts off at $250 but 'm not sure how long it may need to be to reach guess i make some measurement when that comes around.
Personally, the $350~$400 for just the base harness alone is too much for me to justify it. If you can find the connectors, I'm sure we could make the harnesses at a fraction of the cost.
#42
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
cott dam: Yea i was quoted ask for 5ft just for a general idea for the ecu to readh in the glove box was $450. I still in the air but i like to do it and run the wiring thru the left fender just to get it out the way of the turbo. it almost hand in hand move ecu creates less piping for turbo manifold. But im like now every mod is dam near $300min
#43
Gold Wheels FTW
iTrader: (1)
cott dam: Yea i was quoted ask for 5ft just for a general idea for the ecu to readh in the glove box was $450. I still in the air but i like to do it and run the wiring thru the left fender just to get it out the way of the turbo. it almost hand in hand move ecu creates less piping for turbo manifold. But im like now every mod is dam near $300min
#44
I HATE SPEEDBUMPS!
#45
Boostin'
#46
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
there are a couple of places were i might go get a transmission if im not able get one over the rx8 for sale section , calledl a few places one i advised him my car will be boosted and they will cover a 6 month warranty even if i mess the gears up on and will replace it for free. which does sound to bad, another place has a year warranty but is like $950.