Piggy Back
04-02-2006, 12:15 AM
#1
nace0088
Thread Starter
Join Date: Jan 2006
Location: New Jersey
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
What's the best Piggy Back system?
]What's the best Piggy Back system for the RX8?I'm not going to do any FI so I would think a piggy back would suffice with the regular run-of-the-mill bolt on mods.
Last edited by nace0088; 04-02-2006 at 12:21 AM. Reason: A better response.
04-02-2006, 12:38 AM
#4
#1 Legend
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
im sure people will start to chime in soon. this should get interesting.
To help decide whats most valualbe... how much are you willing to spend?
IMO, You really don't want to spend too much on a piggy back if your total gains as N/A aren't going to be so high.
-hS
To help decide whats most valualbe... how much are you willing to spend?
IMO, You really don't want to spend too much on a piggy back if your total gains as N/A aren't going to be so high.
-hS
04-02-2006, 12:46 AM
#5
nace0088
Thread Starter
Join Date: Jan 2006
Location: New Jersey
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
This is true.I don't want to spend 900.00 for the likes of the Turbo XS UTEC.It's probably a great system but I would like to get a lot more bang for my buck.If there is something good enough out there with a smaller price tag I'm all over it.
04-02-2006, 01:20 AM
#9
nace0088
Thread Starter
Join Date: Jan 2006
Location: New Jersey
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Dannobre I need something to tune my 8.I get a lot of pop pops and I've read in someone else's thread that they had it tuned and that went away.I need a piggy back system pop pop fizz fizz needs some relief.
04-02-2006, 01:32 AM
#11
you might want to search for a while... two piggy back systems exhist...
one works very well. the other requires lots and lots of effort..
the turbo xs is not a stand alone and is not available...
read around a bit.
pm me if you need some help.
beers
one works very well. the other requires lots and lots of effort..
the turbo xs is not a stand alone and is not available...
read around a bit.
pm me if you need some help.
beers
04-02-2006, 01:35 AM
#12
The E-manage/Canzoomer works if you tune it for your car. If you are careful you can get it to work without triggering LTFT that will "learn" out your adjustments.
You could get an InterceptorX...basically allows you to tune as a standalone, works well......but it's pricey
Few others....soon there should be a "ECU flash" that can tune...but we are still waiting
You could get an InterceptorX...basically allows you to tune as a standalone, works well......but it's pricey
Few others....soon there should be a "ECU flash" that can tune...but we are still waiting
Pick up a used CZ unit and a CanScan to measure the A/F and get tuning 
There is lots of info on here about the E-manage ( CZ) and you can get help once you are started
04-02-2006, 01:45 AM
#19
Originally Posted by nace0088
Dannobre I don't want to pay the price of the InterceptorX. I want a Piggy Back with a Piggy Back price.
and you better do lots of research before you get either...
read, learn. think. buy..
just my opioin i could be wrong.
beers
04-02-2006, 01:59 AM
#21
if you have a little knowlege of tuning your only choice is the intercepter.... it works right out of the box..... and you can learn..
the other options you can put in and learn, and blow the motor, or blow the coils or mess everything up.... it may or may not work, depends on how much work you are willing to put into it....
sounds like you want a cheap quick no brainer fix....
it does not exist... you pay your money and learn how to learn or you save money and hope to learn...
research is the base....
you have just asked a ?? and dont know anything about what is avaible..
take a couple of days and read, what is your hurry... most of the stuff you cannot buy yet.. if ever.
hope this helps.
beers
the other options you can put in and learn, and blow the motor, or blow the coils or mess everything up.... it may or may not work, depends on how much work you are willing to put into it....
sounds like you want a cheap quick no brainer fix....
it does not exist... you pay your money and learn how to learn or you save money and hope to learn...
research is the base....
you have just asked a ?? and dont know anything about what is avaible..
take a couple of days and read, what is your hurry... most of the stuff you cannot buy yet.. if ever.
hope this helps.
beers
