Notices
Series I Major Horsepower Upgrades This is the place to discuss Super Chargers and Turbos, Nitrous, Porting, etc

greddy turbo drain gasket help

Thread Tools
 
Rate Thread
 
Old Oct 14, 2008 | 09:44 PM
  #26  
BDC's Avatar
BDC
BDC Motorsports
 
Joined: Nov 2006
Posts: 417
Likes: 1
From: Dallas, Tx
Originally Posted by Kane
I'll try it for the Corvette I am working on.

Oil Pan and Tranny gaskets both have leaks and need to be replaced.
That'll be tougher. You'll have to clean the crap out of the bottom ends of those since they're still in the car if I presume correctly. Once you take things apart, it'll be wet with oil. The gearbox will be the worst giving the thickness of gear oils. But, the process will work. That Right Stuff sealant is extremely, extremely, extremely tough. I love it. It's hard to get off after it's set plus you can put whatever you're working on immediately back into service instead of having to wait 24 hours or overnight or whatever for it to cure.

B
Reply
Old Oct 14, 2008 | 09:48 PM
  #27  
Kane's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 44
From: PCB
Yeah; but my options are limited - no matter what I do; I gotta re-seal it with the motor in the car.

But I trust this more than gaskets; one false move on install and they leak; then you have to replace it.... try that about 2-3 times and it loses its fun factor.
Reply
Old Oct 14, 2008 | 09:52 PM
  #28  
BDC's Avatar
BDC
BDC Motorsports
 
Joined: Nov 2006
Posts: 417
Likes: 1
From: Dallas, Tx
Yep I know exactly whatcha mean, Sgt. I trust this stuff. I started using it about 3 yrs ago per a suggestion and I've not used anything else since. It's terrific.

B
Reply
Old Oct 14, 2008 | 09:56 PM
  #29  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,287
Likes: 184
From: A Pacific Island.
"Permatex The Right Stuff" used to be called Hylomar, back when it was developed for Rolls-Royce.

It's a polyol ester, impervious to oil and gas even at high temps.

S
Reply
Old Oct 14, 2008 | 09:59 PM
  #30  
Kane's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 44
From: PCB
Someone should see if it will hold as a head gasket... LOL
Reply
Old Oct 14, 2008 | 10:00 PM
  #31  
BDC's Avatar
BDC
BDC Motorsports
 
Joined: Nov 2006
Posts: 417
Likes: 1
From: Dallas, Tx
Originally Posted by StealthTL
"Permatex The Right Stuff" used to be called Hylomar, back when it was developed for Rolls-Royce.

It's a polyol ester, impervious to oil and gas even at high temps.

S

How far back are you talkin' bout, Stealth? I used the old Hylomar (the tacky, gorgeous ocean-blue stuff) before this recent formula change a couple years back. I started using it in around '97 or so. AFAIK, it's different than The Right Stuff. Right Stuff looks alot like the black sealant windshield replacement guys use.

B
Reply
Old Oct 14, 2008 | 10:05 PM
  #32  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,287
Likes: 184
From: A Pacific Island.
Oh, I didn't know about the formula change - I haven't used any in twenty years.....

S
Reply
Old Oct 14, 2008 | 10:07 PM
  #33  
BDC's Avatar
BDC
BDC Motorsports
 
Joined: Nov 2006
Posts: 417
Likes: 1
From: Dallas, Tx
Careful Stealth, you're dating yourself. :D

B
Reply
Old Oct 14, 2008 | 10:11 PM
  #34  
Kane's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 44
From: PCB
Hey old guys....

Do you know where I can get a hand crank for my RX8 - my starter is acting up.....







I keed - I keed.
Reply
Old Oct 14, 2008 | 10:18 PM
  #35  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,287
Likes: 184
From: A Pacific Island.
GET OFF MY GRASS!!YOU KIDS!!

...whippersnappers!

S
Reply
Old Oct 14, 2008 | 10:26 PM
  #36  
Kane's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 44
From: PCB

Last edited by Kane; Aug 9, 2009 at 05:10 PM.
Reply
Old Oct 14, 2008 | 10:27 PM
  #37  
05rex8's Avatar
sold the 8... :(
iTrader: (7)
 
Joined: Feb 2008
Posts: 4,917
Likes: 0
hahaha
Reply
Old Oct 14, 2008 | 10:44 PM
  #38  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,287
Likes: 184
From: A Pacific Island.
....and take that goldarned InterWeb thingamajig with you!!


S
Reply
Old Oct 14, 2008 | 11:42 PM
  #39  
gregs's Avatar
Thread Starter
Pull My Finger
iTrader: (7)
 
Joined: Jul 2007
Posts: 1,786
Likes: 19
From: So.Cal
permatex the right stuff is that easily to be had at most autoparts stores?
Reply
Old Oct 15, 2008 | 12:41 AM
  #40  
BDC's Avatar
BDC
BDC Motorsports
 
Joined: Nov 2006
Posts: 417
Likes: 1
From: Dallas, Tx
Yep but it's a bit pricy.

B
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunterkelley24
Series I Engine Tuning Forum
14
Jun 14, 2022 08:32 AM
galognu
Rotary Swaps
138
Nov 16, 2020 05:20 AM
airlive
New Member Forum
5
Jun 28, 2020 07:46 AM
JimmyBlack
Series I Major Horsepower Upgrades
273
Feb 10, 2020 10:23 PM
MolecularConcept
RX-8 Discussion
11
Sep 29, 2015 09:21 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:54 PM.