Can someone measure their Greddy intercooler and let me know the core size and then total length with endtanks from the top and bottom with pipe ends.

Thanks
Colin

 

83 views?? please someone help me out and measure their greddy intercooler.

 

Call GReddy.

 

I thought someone on the forum with a Greddy kit could spend 5 minutes and measure their intercooler!!

 

29 1/2" long including in and outlet pipe extensions which measure 1 1/2" from the edge of the box.
7 3/8" wide
3" deep

hope that helps

 

Thanks, that helps a lot!!

 

^just curious...why do you want to know teh dimensions?

 

Either he wants to know for mounting purposes or he is trying to figure out flow rate and horsepower rating

 

hmmm and knowing the demensions will tell him hp rating how? or the flow rate? (i have no idea) it woudl all depend on how it's constructed not just the demensions right? can you just look tha tup on greddy's site? it's a type V intercooler from greddy isn't it?

 

or maybe for a a body Kit that u dont have to Mod to fit it in thier ??

 

if you calculate the output of the dilithium crystals and multiply that with the terminal velocity of an african tse tse fly, and subtract the mass of the intercooler, you get the square of the whp...(but only if the wheel tps sensors are disconected!!!)

 

you left out the division of the flux capacitor and the infindibulator...

he he he

 

Custom turbo setup

 

Personally I think those dimensions are oversized.

You only need to flow about 350 cfm internally so you can get away with a smaller intercooler.

I'm think about doing a custom turbo myself, and all the calcs indicate a smaller intercooler will do.

check out Bell Intercoolers for core sizes.

 

What intercooler cores do you guys prefer, side to side flow or top to bottom. What are some of the pros and cons of each?