Your iPod/MP3 Player Integration Solution is HERE!
Registered User
Joined: Jan 2006
Posts: 3
Likes: 0
Does anyone else have an issue with their iPod not automatically resuming when you start the car? It seems like my Nano will resume if the car's not off for too long, but usually I'll just see the battery charged icon and I have to manually resume it. It's not a big deal, but I thought it was supposed to resume every time the car was started, even if you leave it overnight.
Mine doesn't resume playing after being stopped for more than a few minutes either. It appears that it will play when you select another source, ie radio etc. and then pause again when selecting EX1. (the opposite to what should happen), I have a 60gb ipod.
Wayne.
Guest
Posts: n/a
Originally Posted by Moumtz
I just installed mine, but I screwed up somewhere because now my radio doesn't get reception. which plus is the antenna plug so I can tighten that up? Anyone know?
Registered
Joined: Feb 2006
Posts: 33
Likes: 0
Add me to the list of those who just installed this and love it. I dropped the infamous hidden nut when taking it off so I just left it out. Also taking the wires off is a pain so I removed the glove box an easy removal(check your interior air cleaner too when you remove) and was easily able to connect the adaptor from the back of the glovebox area without having to unclip any wires. Also like that I can install my Sirius tuner with the 1/8 input cord(got an extention from Radio Shack for the 1/8) and keeping the IPOD in the glovebox.
Guest
Posts: n/a
Can someone who has it installed on a Bose system try this for me: Turn your volume to 15 BUT don't connect anything to it. Do you hear any noise or more specifically an intermittent beeping. I hear it, but its pretty faint, but I am getting some noise from mine when the ipod is plugged in through the dock connector...especially when there is a second or two of quiet space before a song starts...almost like the old school hiss you got with cassette tapes...except it doesnt happen on the 1/8 plug and sometimes you hear some random noise. I am waiting to hear back from Falcontx about it.
I can check for this in a few hours when I'm off work and post my findings. So far I haven't noticed any noise and I've had the volume turned up pretty high.
As for the music not resuming (in my other post), I guess it must be a Nano issue... maybe the flash drive acts differently than the iPods with hard drives when connected to the AudioLink module.
As for the music not resuming (in my other post), I guess it must be a Nano issue... maybe the flash drive acts differently than the iPods with hard drives when connected to the AudioLink module.
Originally Posted by djseto
Can someone who has it installed on a Bose system try this for me: Turn your volume to 15 BUT don't connect anything to it. Do you hear any noise or more specifically an intermittent beeping. I hear it, but its pretty faint, but I am getting some noise from mine when the ipod is plugged in through the dock connector...especially when there is a second or two of quiet space before a song starts...almost like the old school hiss you got with cassette tapes...except it doesnt happen on the 1/8 plug and sometimes you hear some random noise. I am waiting to hear back from Falcontx about it.
turkey
Joined: Jan 2006
Posts: 25
Likes: 0
From: Turkey
As you know i ordered my Audio Link and its shiped few days ago. But i don't have any ipod at the moment. What will be the best choice ?Are all of them working perfectly with AudioLink. I am planning to buy 60Gb ipod video black version is it ok or any suggestions
Mehmet
Mehmet
Well, I'm hearing the same faint beeping. Never noticed it before, but with the ignition off and the iPod unplugged, I hear it when the volume is above 10. As long as I can't hear it over the music, I guess I can live with it... but I'd still like to know what is causing it.
Originally Posted by djseto
Thanks..please let me know what you find. I think it will be easier to hear if you don't turn the ignition..just the ACC
Guest
Posts: n/a
Originally Posted by Olorin2
Well, I'm hearing the same faint beeping. Never noticed it before, but with the ignition off and the iPod unplugged, I hear it when the volume is above 10. As long as I can't hear it over the music, I guess I can live with it... but I'd still like to know what is causing it.
Registered User
Joined: Jan 2006
Posts: 1
Likes: 0
I just finished putting one in a clients car for his Sirius piece, I can't get it to switch over to it. Is there some trick for the deck to recognize it ? I have pressed the CD buttons a few times, tried the mode button on the steering wheel, tryed the Tape/MD button on the deck, nothing.
Help ? Anyone ?
Help ? Anyone ?
If the unit is not immediately recognized, disconnect the battery or the main headunit harness. Sometimes it is required to completely remove power from the headunit in order to get it to recognize the AudioLink for the first time.
SdotConley
Joined: Oct 2004
Posts: 22
Likes: 0
Hey quick question if i need to upgrade the firmware i just get that done at the dealership right? any idea how much that costs? Also, I have an xm2go and instead of using the fm transmitter i wanted to hook it up to my stereo via the audio input witha wire. Is is possible to sue the audio input on this device for my xm head unit?
You can try to get it done through the dealership, but I'm not sure it they will do it. I know that the guys at www.mazdaparts.com can do it for $50.00.
Yes, you could definitely use the AudioLink product as a line input for your XM unit.
Yes, you could definitely use the AudioLink product as a line input for your XM unit.
SdotConley
Joined: Oct 2004
Posts: 22
Likes: 0
thanks
hey thanks falcon I appreciate it. I'm definately interested in your product sounds like the best deal. another quick question. In order to get the firmware upgraded do i have to send them anything or well how do they exactly upgrade it or is it someting I have to do myself and they send me something.
Registered User
Joined: Jan 2003
Posts: 1,232
Likes: 2
From: Houston
Bear in mind that if you do send it to MazdaParts you are going to be left with very limited A/C or heating controls while the firmware is getting updated.
So, say you are going to do 2-day shipping to and from MazdaParts. That is going to be a total of $40 for the two-way shipping, $50 for the firmware and not having your climate controls for a week.
I don't have my IPOD unit installed yet but I had to go through the firmware mess I mentioned above.
-Mr. Wigggles
So, say you are going to do 2-day shipping to and from MazdaParts. That is going to be a total of $40 for the two-way shipping, $50 for the firmware and not having your climate controls for a week.
I don't have my IPOD unit installed yet but I had to go through the firmware mess I mentioned above.
-Mr. Wigggles
Registered User
Joined: Jan 2003
Posts: 1,232
Likes: 2
From: Houston
Originally Posted by hitman408
mazdaparts.com is charging $95 for the update now.
-Mr. Wigggles
Registered User
Joined: Jan 2005
Posts: 97
Likes: 0
Confused...
Well, I have had the Audio Link IPOD Intergration kit for approx. 1 month. Been perfect since....that is until now. I was driving around and was listening to my IPod through the radio, and accidently hit the mode button on the steering wheel. This switched me to FM1. The problem I'm having now, is that I cannot switch back to EX1 or even CD. I thought we were able to switch throughout the different types of modes without any problems??? I tried turning the car off and disconnecting the Ipod and connecting it again and still no function of CD button. What do I have to do to fix this. Should I disconnect the Radio fuse and then connect the fuse and the plug the Ipod back in.??? I want to get this fixed asap, because I'm going out tonight and want to listen to my Ipod, not commercials... 
Well if anyone can help, I will greatly appreciate it...
-Rich
Sorry for the long post
Well if anyone can help, I will greatly appreciate it...-Rich
Sorry for the long post