Metra kit update (need cable? look here)
#276
EveryonesFavouritePenguin
iTrader: (2)
Join Date: Dec 2009
Location: Stoney Creek, Ontario
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
updated!
CompMan - NJ
Reckoning - VA
HellHammer - FL
xpingux - Ontario
NSrobbie - Ontario
edblor - Ontario
chelecuche - CA
steveard - Vancouver, Washington
brandirena86 - Meridian, ID
CompMan - NJ
Reckoning - VA
HellHammer - FL
xpingux - Ontario
NSrobbie - Ontario
edblor - Ontario
chelecuche - CA
steveard - Vancouver, Washington
brandirena86 - Meridian, ID
#277
Registered User
iTrader: (7)
Join Date: May 2010
Location: SOCAL
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
I remove myself from the list...
Updated:
CompMan - NJ
Reckoning - VA
HellHammer - FL
xpingux - Ontario
NSrobbie - Ontario
edblor - Ontario
steveard - Vancouver, Washington
brandirena86 - Meridian, ID
Updated:
CompMan - NJ
Reckoning - VA
HellHammer - FL
xpingux - Ontario
NSrobbie - Ontario
edblor - Ontario
steveard - Vancouver, Washington
brandirena86 - Meridian, ID
#282
New Member
Join Date: Jul 2010
Location: Dahlgren, VA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Cable arrived today. Getting mailing address for next person, and with luck it'll be gone tomorrow.
Last edited by Reckoning; 08-18-2010 at 11:39 AM. Reason: I felt like it
#283
Destroyer of Dreams
iTrader: (8)
Join Date: Oct 2006
Location: Palm Harbor, FL
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
I remove myself from the list...Thanks again. Send to xpingux
Updated:
CompMan - NJ
Reckoning - VA
xpingux - Ontario
NSrobbie - Ontario
edblor - Ontario
steveard - Vancouver, Washington
brandirena86 - Meridian, ID
Updated:
CompMan - NJ
Reckoning - VA
xpingux - Ontario
NSrobbie - Ontario
edblor - Ontario
steveard - Vancouver, Washington
brandirena86 - Meridian, ID
#285
add me to the list please.
Does the firmware update solve that a/c issue? Or is mine a soldering issue? if it is can someone direct me to the thread?
Sometimes when I turn the **** from hot to cold, it doesn't click over, I have to do it a few times, also my AMB TEMP is never right.
Or do I have a bigger problem?
PHX, AZ
Also, how do you check your firmware on your axxess box?
Does the firmware update solve that a/c issue? Or is mine a soldering issue? if it is can someone direct me to the thread?
Sometimes when I turn the **** from hot to cold, it doesn't click over, I have to do it a few times, also my AMB TEMP is never right.
Or do I have a bigger problem?
PHX, AZ
Also, how do you check your firmware on your axxess box?
Last edited by Rxster; 08-19-2010 at 06:17 PM.
#287
zoom zoom
Join Date: Jun 2007
Location: Toronto Ontario
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
add me to the list please.
Does the firmware update solve that a/c issue? Or is mine a soldering issue? if it is can someone direct me to the thread?
Sometimes when I turn the **** from hot to cold, it doesn't click over, I have to do it a few times, also my AMB TEMP is never right.
Or do I have a bigger problem?
PHX, AZ
Also, how do you check your firmware on your axxess box?
Does the firmware update solve that a/c issue? Or is mine a soldering issue? if it is can someone direct me to the thread?
Sometimes when I turn the **** from hot to cold, it doesn't click over, I have to do it a few times, also my AMB TEMP is never right.
Or do I have a bigger problem?
PHX, AZ
Also, how do you check your firmware on your axxess box?
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-no-heat-repair-heater-control-158200/
#288
New Member
Join Date: Jul 2010
Location: Dahlgren, VA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Aswc
I sent the cable on the 20th. It should arrive within the next two days if I'm not mistaken. Sorry for the delay,as for my aswc, im pretty sure its fried, i tried it with a different head unit and it was even less responsive. It just wont output the correct signal, if any at all. And yess I checked the wiring and yess I manually reprogrammed it, but to no avail. I ordered a new aswc from an authorized distributor this time, hopefully it'll work.
#290
New Member
Join Date: Jul 2010
Location: Dahlgren, VA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
What was wrong
I tried the axxess cable and it didn't work so I ended up buying a new aswc.
Symptoms: When it auto programed, only two buttons would work, and they don't do what they're supposed to do.
The next button would change modes and the mode button would skip tracks. No change after manual programming.
When used with a different head unit, the head unit wasn't receiving response from the aswc=> nothing.
if you have similar symptoms look here:
https://www.rx8club.com/showthread.p...50#post3679350
Symptoms: When it auto programed, only two buttons would work, and they don't do what they're supposed to do.
The next button would change modes and the mode button would skip tracks. No change after manual programming.
When used with a different head unit, the head unit wasn't receiving response from the aswc=> nothing.
if you have similar symptoms look here:
https://www.rx8club.com/showthread.p...50#post3679350
Last edited by Reckoning; 09-02-2010 at 04:53 PM. Reason: Update
#291
New Member
Join Date: Jul 2010
Location: Dahlgren, VA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
#295
EveryonesFavouritePenguin
iTrader: (2)
Join Date: Dec 2009
Location: Stoney Creek, Ontario
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
xpingux - Ontario
NSrobbie - Ontario
edblor - Ontario
brandirena86 - Meridian, ID
lynchy803 - MA
Rxster - Phoenix, AZ
fireflypulse - Orange County, CA
i0nicx - Outer Space
omg u just maed it 2 teh listlol.
(Where are you from, boy?)
NSrobbie - Ontario
edblor - Ontario
brandirena86 - Meridian, ID
lynchy803 - MA
Rxster - Phoenix, AZ
fireflypulse - Orange County, CA
i0nicx - Outer Space
omg u just maed it 2 teh listlol.
(Where are you from, boy?)
#300
zoom zoom
Join Date: Jun 2007
Location: Toronto Ontario
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Cable has been shipped to edblor
edblor - Ontario
brandirena86 - Meridian, ID
lynchy803 - MA
Rxster - Phoenix, AZ
fireflypulse - Orange County, CA
i0nicx - levittown, ny(long island)
edblor - Ontario
brandirena86 - Meridian, ID
lynchy803 - MA
Rxster - Phoenix, AZ
fireflypulse - Orange County, CA
i0nicx - levittown, ny(long island)