Keyless remote programming
04-17-2009, 09:17 AM
#1
Xboxgametag:Chafed Banana
Thread Starter
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Keyless remote programming
Does anyone know how to program a keyless remote? I bought a new used 8 that didn't come with a keyless remote. I have one of the remotes from my old 8. Can I program it to work with my new car? If possible, I could use step by step instructions on how to. Thanks
04-17-2009, 07:37 PM
#2
Xboxgametag:Chafed Banana
Thread Starter
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Stopped by a Mazda dealer today and they showed me how to bind a remote with a car. Here's how:
sit in the car with the driver door open.
1. Turn ignition on and off 3 times and leave on (just turn one click, don't start the car)
2. Press the door open sensor button on the rear door (it's rubber & about knee high) 3 times.
3. Press the unlock button on the remote.
Wait a second and try. Should work. Hope this helps out anyone else in the future.
Note: You have to do all three steps relatively fast from one to the other.
sit in the car with the driver door open.
1. Turn ignition on and off 3 times and leave on (just turn one click, don't start the car)
2. Press the door open sensor button on the rear door (it's rubber & about knee high) 3 times.
3. Press the unlock button on the remote.
Wait a second and try. Should work. Hope this helps out anyone else in the future.
Note: You have to do all three steps relatively fast from one to the other.
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
