Interior dome light?
#1
Interior dome light?
Hey yall newb question here... How do you get to the bulbs for the map dome lights?? The light bulbs crapped out on me and their is a Tibet dead spider in their too I know the 2 screws you have to remove, but when I pull down it doesnt want to come off. Is their another hidden screw missing or am I not pullin down hard enough or am I doin it all wrong...
#2
Registered
iTrader: (7)
Great website to bookmark http://foxed.ca/rx7manual/2003mazdarx8/
1. Disconnect the negative battery cable.
2. Remove the screws.
3. Remove the map light. (See Map Light Removal Note.)
4. Disconnect the connector.
5. Remove the socket, then remove the map light bulb.
6. Install in the reverse order of removal.
Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the map light.
2. Press the tab, and remove the map light.
1. Disconnect the negative battery cable.
2. Remove the screws.
3. Remove the map light. (See Map Light Removal Note.)
4. Disconnect the connector.
5. Remove the socket, then remove the map light bulb.
6. Install in the reverse order of removal.
Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the map light.
2. Press the tab, and remove the map light.
#6
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
Some people like pics rather than just drawings!
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-correct-way-remove-maplight-sunroof-switch-unit-97596/
Personal opinion, but I like this DIY mo betta even tough the pics weren't correctly linked in.
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-correct-way-remove-maplight-sunroof-switch-unit-97596/
Personal opinion, but I like this DIY mo betta even tough the pics weren't correctly linked in.
Thread
Thread Starter
Forum
Replies
Last Post