Notices

HELP! can't decide which amp to get...

Thread Tools
 
Rate Thread
 
Old Jul 28, 2006 | 10:31 AM
  #1  
1145climber's Avatar
Thread Starter
RX-8 Enthusiast
 
Joined: Jul 2006
Posts: 277
Likes: 2
From: Boston Area, MA
Exclamation HELP! can't decide which amp to get...

Hey. I have one JL 12W3V2 (d4), a closed box, and a 1 farad capacitor lying around. they recommend anywhere from 250-350 watts driving the sub, and i would wire it in parallel (2 ohms total). I was wondering, what amp would be best for it? I am looking at the following:
  • Rockford Fosgate Punch P325.1 (325 watts RMS x1 @ 2 ohms, class AB)
  • Rockford Fosgate Punch P325.2 (325 watts RMS x1 @ 4 ohms (bridged), class BD)
  • Alpine MRP-M450 (400 watts RMS x1 @ 2 ohms, class D)

First off, for the same price, why wouldnt I get the P325.2 instead of the P325.1??? it seems like its more powerful and more flexible. One thing to consider is, could i drive 2 ohms with the bridged connection? maybe not?

also, while the M450 is in the same power-range as the others, i can afford the M650, which is 600 watts into 2 ohms. would this make sense because i can afford it, or would it be too powerful? my box is a little smaller than it should be, though, so maybe extra power would be a good thing?

OR, does anyone have any other amp suggestions? i see some JBL's that are in my power and price range, but i hear they arent as good as the alpine, fosgate, or JL amps. im looking for clean, good sounding bass, not some deafeningly loud and bad sounding bass. the JL 250/1 is nice, but i think i want a remote bass EQ adjuster, because the factory head unit doesnt do a good job with bass. also, it is a little pricey.

any help would be muchh appreciated. thanks!

Last edited by 1145climber; Jul 28, 2006 at 10:59 AM.
Reply
Old Jul 28, 2006 | 05:54 PM
  #2  
jstkilntim's Avatar
resU deretsigeR
 
Joined: Jan 2006
Posts: 743
Likes: 0
From: Jacksonville, FL
I would definitely go for the JL 250/1. It is pricey for a reason. Plus that speaker was pretty much designed for that amp. Do you have Bose or Non? How you are planning on integrating it? You can always use a LOC that has a level control.
Reply
Old Jul 29, 2006 | 09:45 AM
  #3  
1145climber's Avatar
Thread Starter
RX-8 Enthusiast
 
Joined: Jul 2006
Posts: 277
Likes: 2
From: Boston Area, MA
yeah i was thinking about that. i have bose, and i definately plan on using a(n) LOC. i want to tap pre-amp signals and run them through the LOC to my amp. i still dont think i can afford the 250/1 though
Reply
Old Jul 29, 2006 | 11:35 PM
  #4  
Kel Rx8's Avatar
if your not 1st your last
 
Joined: Jan 2004
Posts: 4,889
Likes: 1
From: Jersey & Peru
250/1 I suggest
Reply
Old Aug 3, 2006 | 02:01 PM
  #5  
1145climber's Avatar
Thread Starter
RX-8 Enthusiast
 
Joined: Jul 2006
Posts: 277
Likes: 2
From: Boston Area, MA
ugh, i really like the 250/1 but i need to find something cheaper.... any recommendations for amps that are below 200 or 250?
Reply
Old Aug 6, 2006 | 11:47 AM
  #6  
jstkilntim's Avatar
resU deretsigeR
 
Joined: Jan 2006
Posts: 743
Likes: 0
From: Jacksonville, FL
For a little over this price range try the Eclipse XA2000.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jazzmeson
RX-8 Multimedia/Photo Gallery
11
Mar 2, 2016 02:25 PM
Quiggs321
New Member Forum
19
Sep 30, 2015 05:34 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
Sep 27, 2015 07:38 PM
juicemantwon
New Member Forum
3
Sep 26, 2015 12:30 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 11:25 PM.