having trouble removing piece aroung the clock...
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: boston
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
having trouble removing piece aroung the clock...
i need to get the peice around the clock off, the one just above the radio/center airconditioner vents...... i plan on getting four gaudes molded/ fiberglassed into the dash, but the shop workers cant get it off, without thinking they are goin to break it...
any suggestions.... should i start from the center console and work my way up?
also... i been reading about a NEO ION....... can someone explain to me what that is please?
any suggestions.... should i start from the center console and work my way up?
also... i been reading about a NEO ION....... can someone explain to me what that is please?
#3
Metatron
iTrader: (1)
Bottom up.....
You gots to work from the bottom up - it is not possible to just pry it out.
Remove-
shifter **** - unscrew
shifter surround - pull straight up
ash tray - two screws & electrical connectors
stereo unit - two screws (and a hidden bolt!) and pull out a bit
vents - just pull out
finally, top clock moulding, two screws then lift towards rear view mirror.
Have fun :D
S
Remove-
shifter **** - unscrew
shifter surround - pull straight up
ash tray - two screws & electrical connectors
stereo unit - two screws (and a hidden bolt!) and pull out a bit
vents - just pull out
finally, top clock moulding, two screws then lift towards rear view mirror.
Have fun :D
S
#10
Registered User
Thread Starter
Join Date: Apr 2005
Location: boston
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
thankyou
all this info was great.. im not doing it myself.. but went to the garage today and showed them this thread... and they're doing as i type this..
so thankyou
-j
so thankyou
-j
#11
Ex- member.
Originally Posted by rkostolni
What is the single guage pod you have mounted on the Apillar?
Originally Posted by projectcar
all this info was great.. im not doing it myself.. but went to the garage today and showed them this thread... and they're doing as i type this..
so thankyou
-j
so thankyou
-j
Last edited by adrian-1; 05-18-2005 at 03:58 PM.
#14
Registered User
Thread Starter
Join Date: Apr 2005
Location: boston
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
in process...
it's off, mounted, now waiting for fiberglass to be set.. ill post pictures when complete.. thanks again..
o... could someone tell me what the neo ion is please.. i saw a couple of threads about it and still dont know what it is
o... could someone tell me what the neo ion is please.. i saw a couple of threads about it and still dont know what it is
Thread
Thread Starter
Forum
Replies
Last Post
SimonT182
RX-8 Parts For Sale/Wanted
4
10-02-2015 10:33 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM