Looks Great, love the gauges
|
are they as accurate as the gauges it comes with?
i know zip about the different gauge companies. i have the red/black interior. and this just matches perfectly. |
|
jorge you are the freaking man!!!! great DIY!! Im jealous now
|
Woot! Great writeup, Jorge! Amost missed this thread.
Gonna have to make it to one of the LAX meets to see this (when you decide to go, that is) LOL. |
Sticky!!!
|
I realy liked the set up and instructions, thanks.
I was thinking about doing something similar but was looking at getting dual digital guages so I can get all my guages in one place. I am considering going FI at some point so I would want, boost, a/f ratio, oil temp and pressure and water temp. I found that SPA makes dual digital guages but they are expensive and I did not find an a/f ratio guage. They have a dual oil temp and pressure guage, dual water temp and boost and they have some egt temp guages and volt guages just no a/f guages. I could go with dual oil temp and pressure guage, dual water temp and boost and then put another brand a/f guage in there but I would want a uniform look. Does anybody know any other company that makes good dual guages? I think the 2 spa guages I listed would come to about $500. I would like to less and I wanted the af ratio guage not just an EGT guage. Thoughts? |
Originally Posted by RotaryRasp
whoa, very nicely done jedi....
p.s. - i really like those footwell lights you got!
Originally Posted by Shinka213
nice work jorge....youre always involved in a top notch project...
Originally Posted by RA-Eight
That looks really nice, matches the interior very well. Digital readout is the way to go for that location.
that set up is off the chain, jorge! haha well done!!!! nice detailed instructions too
Originally Posted by xdeedubbx
jorge you are the freaking man!!!! great DIY!! Im jealous now
Originally Posted by elf
Woot! Great writeup, Jorge! Amost missed this thread.
Gonna have to make it to one of the LAX meets to see this (when you decide to go, that is) LOL.
Originally Posted by highway8
Does anybody know any other company that makes good dual guages? I think the 2 spa guages I listed would come to about $500. I would like to less and I wanted the af ratio guage not just an EGT guage.
|
NICE!!!!! (As usual)
|
Not only is he a Jedi master, and vicious with a light saber . . .But he can work on cars too.
Such a nice job. Love the look. This look is factory stock. The fit, the color match, everything is top notch. Good job and a great DIY. |
Sweet setup Jorge! I'm jealous.. we gotta do lunch sometime soon (so I can see these in action!) =D
I hope the mods sticky this.! It's the only thread that shows how to properly ground / install electrical gauges... |
One more for stickyness....
Those gauges as well as the write-up are schweeet! Excellent job Jorge! |
yeaaa, why isnt this a sticky?
|
see if i can help on this.
requested move to diy section and sticky. beers :beer: |
Thanks Swoope!
Problem is that img tags don't work in the DIY section which is why I posted it here. Figured the bigger pictures were easier to see then clicking all the small thumbnails at the bottom. Here's the post from Zoom about img tags + DIY section: https://www.rx8club.com/showpost.php...83&postcount=4 |
Awesome job, Jedi! The force is clearly with you. :) Moving to DIY forum, for all posterity, ans stickying it for a week or so. :D
|
Yea Yea!!
|
Thanks Omicron!
D'oh!!! Just noticed all my pics went away. Any chance of getting this sticked in the Interior / Electronics forum instead? Thanks again guys for all the support. |
Originally Posted by Jedi54
(Post 2225367)
Thanks Swoope!
Problem is that img tags don't work in the DIY section which is why I posted it here. Figured the bigger pictures were easier to see then clicking all the small thumbnails at the bottom. Here's the post from Zoom about img tags + DIY section: https://www.rx8club.com/showpost.php...83&postcount=4 ah i get it now.. maybe you could upload the pics in diy. and get a sticky in the elec. forum. beers :beer: |
Good looking setup and great DIY. I've been wanting some gauges for a while and these look great.
Thanks Jedi. |
Yeah, stickiness, finally --- well, at least for awhile :)
Too bad there isn't a way to position pics (that's been uploaded to the forum) within the text of a post. I think DIYs flow much better that way. |
Moved it back for now...we'll get it all sorted out :)
|
dude those gauges look so nice in there. Do they fit perfectly flush or is there some overlapping?
|
Originally Posted by Ross_Dawg
(Post 2256329)
dude those gauges look so nice in there. Do they fit perfectly flush or is there some overlapping?
|
Very sexy
|
All times are GMT -5. The time now is 03:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands