Notices

Audio design schematic up for wiring help

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-24-2006, 10:00 PM
  #1  
Registered User
Thread Starter
 
Shagster D's Avatar
 
Join Date: Dec 2006
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Lightbulb Audio design schematic up for wiring help

Greetings all! Brand new to the forums and proud new owner of an RX8.

I am designing a small, yet clean sounding stealthy audio system for the car. Hopefully fanatics like yourselves can help me determine if I have the proper hardware based on the stock equipment I plan to use with it.

1) I have the BASE model stereo in the car (no Bose AMPs). Based on that, is there a CD Changer input on back of the HU to take advantage of the Audio Link MP3 player I read about here.

2) Is the Line-Out setup I have displayed OK? Any possibility of burning up the HU?

3) Does the HU have a remote turn-on output?

4) Most importantly, if you see anything missing connectivity-wise, errors etc, please feel free to contribute.
Attached Thumbnails Audio design schematic up for wiring help-dd_rx8_audio.jpg  

Last edited by Shagster D; 12-25-2006 at 08:12 PM.
Old 12-24-2006, 10:30 PM
  #2  
Peeping over the fence
 
Wilson's Avatar
 
Join Date: Oct 2006
Location: Natchez, MS
Posts: 524
Likes: 0
Received 0 Likes on 0 Posts
Nice drawing.

If you use the Audio Link for line input for the XM radio, you shouldn't need the FM modulator. Other than that, it looks good.

Welcome to the club.
Old 12-25-2006, 07:16 PM
  #3  
Registered User
Thread Starter
 
Shagster D's Avatar
 
Join Date: Dec 2006
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Thanks Wilson!

For whatever reason, I was under the impression that the Line In on the Audio Link was just for HU control and the RCA Stereo on the XM Modulator was for a direct Line In on the HU. So that changes things a bit.

I guess I'd just need an RCA Stereo to 1/8" Mini plug. I'd rather have a direct signal vs. FM modulation anyway.

Shagster D
Old 12-25-2006, 08:07 PM
  #4  
Peeping over the fence
 
Wilson's Avatar
 
Join Date: Oct 2006
Location: Natchez, MS
Posts: 524
Likes: 0
Received 0 Likes on 0 Posts
The line in will sound much better than the FM Modulation.
Old 01-02-2007, 08:28 PM
  #5  
Registered User
Thread Starter
 
Shagster D's Avatar
 
Join Date: Dec 2006
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Well, I decided to change up the speaker selection from MB Quarts to Phoenix Gold. Better priced and sounds better (in my opinion). I snagged 2 of the Xenon X5.0 Component 5 1/4 sets with the 6X8 and 6X9 plate conversions. Since I have an Audiobahn ALUM10N sub, the low end is taken care of.

I will eventually upload the pics of the install. Thanks for the help

Shagster D
Old 01-02-2007, 09:55 PM
  #6  
Spastic Monkey
 
TheBri's Avatar
 
Join Date: Mar 2006
Location: Kirkland
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Shagster D
2) Is the Line-Out setup I have displayed OK? Any possibility of burning up the HU?
Nope. A line converter isn't going to blow up your head unit.

Originally Posted by Shagster D
3) Does the HU have a remote turn-on output?
You should really read all the stickys at the top of this section of the forum. But I'll throw you a frickin' bone and give you the answer: no.

You still should read all the stickys. They helped me tremendously when I was planning (and doing) my audio system upgrade. Here is a link to the tread I created when I was done: CLICK ME
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
jer2911
New Member Forum
8
09-29-2015 06:37 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Audio design schematic up for wiring help



All times are GMT -5. The time now is 11:34 PM.