r042wal

Yesterday I got my CF MS wing, the nockoff from carsoption.com. I thought I would mount it today, but all the welded trunk lid reinforcment on the underside covers where you have to put the screws to mount the wing.

What's the best way to do this?

M-ster

I have the CF MS wing as well, not from carsoption thou. But I guess it should be the same. You actually will not drill the reinforcement area. You will just miss them, drilling only on flat outer end (just miss the cushioned area).

Redfusion3

iTrader: (2)

I am having the same problem, My dealer is installing it and they want to know where the templete is for it. I called the guy at Carsoptions and he said they dont send one out with the spoliers...so how do we know how to install them?

I dont want to mess my car up.

rob.rotor

Two people lined mine up by sight on the outside and then taped it in place. Once in place, there is enough clearance from the top to get a small scribe in place to mark reference spots for the location of the two mouning brackets.

After these spots are made, dismantle the wing, line the brackets up and drill. The holes will come through on the flat spots on the underside to the edge of the deck lid.

TWe used epoxy on the edge of the trunk lide where the lower wing (with the lip) meets. I did not want vibration.

dazygirl415

I have the replica wing from carsoption and it mounts just like m-ster said.

rob.rotor

Show me yours and I'll show you mine :D

dazygirl415

Lol, check out my garage.