Notices

My new rear rotary lamp

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-26-2005, 12:40 AM
  #1  
Registered Lunatic
Thread Starter
iTrader: (1)
 
Tamas's Avatar
 
Join Date: Aug 2003
Location: SF Bay Area, California
Posts: 3,575
Received 37 Likes on 32 Posts
My new rear rotary lamp

I always liked how the RX-8 has a rotary-shaped fog light in other countries outside the USA - but like quite a few other options, this is something that's not available here as an OEM item. But it can be had... except that this one is not hooked up as a rear fog light, rather than an additional light that is on whenever the taillights are illuminated. It is hooked up to the license plate light.
I'm sure some adventurous types could wire it to the fog light switch and use a brighter bulb - but as an ornament, this works quite well and it looks great. I love it!
One additional advantage compared to the OEM rotary lamp is that this can be used together with the rotary accent (or without, if desired).

Now for the pics... the first few show the light assembly and the parts that come with the kit (minus some wire taps). It is a totally professional fabrication - look at how the lamp appears as an OEM item.
Attached Thumbnails My new rear rotary lamp-p1010321.jpg   My new rear rotary lamp-p1010322.jpg   My new rear rotary lamp-p1010323.jpg  

Last edited by Tamas; 12-26-2005 at 01:55 AM.
Old 12-26-2005, 12:43 AM
  #2  
Registered
iTrader: (1)
 
NgoRX8's Avatar
 
Join Date: Oct 2004
Location: CA, Rowland Hts.
Posts: 10,239
Likes: 0
Received 4 Likes on 4 Posts
Very nice. Are these from derwankel from the "other side"?

Make sure you have some installed pics.
Old 12-26-2005, 12:43 AM
  #3  
Registered Lunatic
Thread Starter
iTrader: (1)
 
Tamas's Avatar
 
Join Date: Aug 2003
Location: SF Bay Area, California
Posts: 3,575
Received 37 Likes on 32 Posts
A hole must be cut into the rotor-shaped recess - I used a hole saw. The end result non-illuminated and with the lights on...
Attached Thumbnails My new rear rotary lamp-p1010324.jpg   My new rear rotary lamp-p1010327.jpg   My new rear rotary lamp-p1010330.jpg  
Old 12-26-2005, 12:44 AM
  #4  
Registered Lunatic
Thread Starter
iTrader: (1)
 
Tamas's Avatar
 
Join Date: Aug 2003
Location: SF Bay Area, California
Posts: 3,575
Received 37 Likes on 32 Posts
Finally, some close-up shots.
Attached Thumbnails My new rear rotary lamp-p1010331.jpg   My new rear rotary lamp-p1010333.jpg   My new rear rotary lamp-p1010335.jpg  
Old 12-26-2005, 12:46 AM
  #5  
Registered Lunatic
Thread Starter
iTrader: (1)
 
Tamas's Avatar
 
Join Date: Aug 2003
Location: SF Bay Area, California
Posts: 3,575
Received 37 Likes on 32 Posts
Originally Posted by NgoRX8
Very nice. Are these from derwankel from the "other side"?
Yep

Make sure you have some installed pics.
Your wish is my command, sir
Old 12-26-2005, 12:56 AM
  #6  
cry me a river...
 
EZZY's Avatar
 
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes on 0 Posts
looks great!
well done
Old 12-26-2005, 01:01 AM
  #7  
I love GOOOLD
iTrader: (1)
 
Im_DANomite's Avatar
 
Join Date: Dec 2004
Location: Severn, MD
Posts: 2,845
Likes: 0
Received 3 Likes on 3 Posts
wow! i like that a lot...good job!
Old 12-26-2005, 01:32 AM
  #8  
Registered
iTrader: (1)
 
NgoRX8's Avatar
 
Join Date: Oct 2004
Location: CA, Rowland Hts.
Posts: 10,239
Likes: 0
Received 4 Likes on 4 Posts
Nice. I panicked when I saw the cut hole in the rear rotary crest, but it looks sweet in the end.
Old 12-26-2005, 02:35 AM
  #9  
100% Italian
 
mikeb's Avatar
 
Join Date: Jul 2003
Location: orange,ca
Posts: 9,422
Likes: 0
Received 0 Likes on 0 Posts
sweet
I always wanted that mod
Old 12-26-2005, 02:44 AM
  #10  
cry me a river...
 
EZZY's Avatar
 
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes on 0 Posts
do it mike!
you can make it as a reverse light too......
Old 12-26-2005, 06:27 AM
  #11  
www.EVO-R.Net
iTrader: (2)
 
fd3s777's Avatar
 
Join Date: Jun 2004
Location: New York
Posts: 852
Likes: 0
Received 0 Likes on 0 Posts
Nice...
Old 12-26-2005, 06:57 AM
  #12  
pbuck1
 
pbuck1's Avatar
 
Join Date: Aug 2004
Location: Cottage Grove ,WI
Posts: 155
Likes: 0
Received 0 Likes on 0 Posts
Nice job ! Where did you get it ?
Old 12-26-2005, 08:46 AM
  #13  
Misfit Moderator TnC
 
chrism's Avatar
 
Join Date: Feb 2005
Location: armpit of the USA
Posts: 13,309
Likes: 0
Received 1 Like on 1 Post
we can tell you but others may kill you....pm me...or click on my sig and go to page 2 all the way at the bottom!

Last edited by chrism; 12-26-2005 at 08:48 AM.
Old 12-26-2005, 10:33 AM
  #14  
Registered Lunatic
Thread Starter
iTrader: (1)
 
Tamas's Avatar
 
Join Date: Aug 2003
Location: SF Bay Area, California
Posts: 3,575
Received 37 Likes on 32 Posts
Originally Posted by EZZY
you can make it as a reverse light too......
That's correct - the lens can be clear instead of red upon request.
Old 12-26-2005, 01:23 PM
  #15  
Stuck in a love triangle
 
JeRKy 8 Owner's Avatar
 
Join Date: Aug 2003
Location: Miami, FL
Posts: 2,201
Likes: 0
Received 3 Likes on 3 Posts
From what I can remember, I've never seen one with the rear rotary accent still in tact. All the rear lamps I have seen have always had to cut out that entire area.

Great job

Oh and Tamas....
Old 12-26-2005, 01:27 PM
  #16  
IM2BZ2P
 
NVMYGT's Avatar
 
Join Date: Mar 2005
Location: Pittsburgh, PA
Posts: 501
Likes: 0
Received 0 Likes on 0 Posts
This is such a great mod! I just finished installing mine and am ordering the rear rotary accent shortly:
Old 12-26-2005, 01:45 PM
  #18  
IM2BZ2P
 
NVMYGT's Avatar
 
Join Date: Mar 2005
Location: Pittsburgh, PA
Posts: 501
Likes: 0
Received 0 Likes on 0 Posts
The accent goes on after the lamp is installed. You scared me for a sec, I had to dig up the instructions to be sure.
Old 12-26-2005, 02:46 PM
  #19  
Misfit Moderator TnC
 
chrism's Avatar
 
Join Date: Feb 2005
Location: armpit of the USA
Posts: 13,309
Likes: 0
Received 1 Like on 1 Post
he does make an awesome product doesnt he

Old 12-26-2005, 08:23 PM
  #20  
Registered Lunatic
Thread Starter
iTrader: (1)
 
Tamas's Avatar
 
Join Date: Aug 2003
Location: SF Bay Area, California
Posts: 3,575
Received 37 Likes on 32 Posts
Originally Posted by JeRKy 8 Owner
From what I can remember, I've never seen one with the rear rotary accent still in tact. All the rear lamps I have seen have always had to cut out that entire area.
That's the case with the OEM fog light - but to my understanding, this one is manufactured to either fit together with the rotary accent or without. It's made according to your request.

Oh and Tamas....
Geez... you're starting to scare me
Good thing you live so far away

Originally Posted by Cool-Blue-Dad
Wait, doesn't the lamp sit inside or overlap the accent? Wouldn't you need to install the accent first?
The lamp sits inside the accent, there's no overlapping. You have to install the light first and then the accent. If you already have the accent on, you must pull it off and then reinstall.

Last edited by Tamas; 12-26-2005 at 10:58 PM.
Old 12-26-2005, 09:42 PM
  #21  
pbuck1
 
pbuck1's Avatar
 
Join Date: Aug 2004
Location: Cottage Grove ,WI
Posts: 155
Likes: 0
Received 0 Likes on 0 Posts
pm sent .
Old 12-27-2005, 11:19 AM
  #22  
Registered User
 
mark205's Avatar
 
Join Date: Oct 2005
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
OK ... this just looks SICK! ... Gotta get me one of these. Love the look with the accent ... looks like it should have come this way from the factory.
Old 12-27-2005, 08:01 PM
  #23  
Misfit Moderator TnC
 
chrism's Avatar
 
Join Date: Feb 2005
Location: armpit of the USA
Posts: 13,309
Likes: 0
Received 1 Like on 1 Post
it did.....in europe and japan
Old 12-27-2005, 08:44 PM
  #24  
Registered Lunatic
Thread Starter
iTrader: (1)
 
Tamas's Avatar
 
Join Date: Aug 2003
Location: SF Bay Area, California
Posts: 3,575
Received 37 Likes on 32 Posts
Originally Posted by chrism
it did.....in europe and japan
Not exactly - those don't fit the rear accent and this one does
Oh, and those are also real fog lights, while this one is usually just an extra taillight.
A rear fog light is a requirement in many European countries if I'm not mistaken.
Old 12-29-2005, 03:44 PM
  #25  
Registered User
 
derwankel's Avatar
 
Join Date: Dec 2003
Location: Hotlanta
Posts: 448
Likes: 0
Received 0 Likes on 0 Posts
They look great guys ... glad you are enjoying them.


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: My new rear rotary lamp



All times are GMT -5. The time now is 10:35 AM.