MS kit/oil cooler duct weirdness
#1
MS kit/oil cooler duct weirdness
so i just had my ms front installed and there's something weird about the oil cooler ducts. you know how the oil coolers have that rubber surround? and how the ms front has those plastic ducts built in? well the shop that put the bumper on just kinda squeezed it on there and now the rubber bits are somewhat blocking the oil coolers. this looks really strange so i need to figure out what to do about it
have you guys seen this before? do you leave the rubber ducts in or take them out? do you just tuck them in lower so they don't show? any ideas would be appreciated so i can go yell at the shop. i'm a little worried about taking them out since they hold in my RB oil cooler screens..
thanks!
have you guys seen this before? do you leave the rubber ducts in or take them out? do you just tuck them in lower so they don't show? any ideas would be appreciated so i can go yell at the shop. i'm a little worried about taking them out since they hold in my RB oil cooler screens..
thanks!
#7
That doesn't look right at all. I had my dealership install my kit few weeks ago, it doesn't come with any template what so ever, and they had to eye ball the fog light with bracket onto the bumper to trim the mesh to fit the fog light because the light stick out a little bit through the mesh.
#11
thanks all
these are genuine ms parts and did have instructions, but i didn't read them myself. i figured the shop would though..
so you're saying they should take off the original rubber ducts? the ms kit has ducts already built in so are those sufficient? how can i keep my rb oil cooler screens in after the fact?
as for fog lights, i read the thread about the install and know you can cut the ms grill so the lights can come through but they said it wasn't possible to move them forward anymore. you guys are saying that your fogs stick through the mesh? i can make them fix all this for free, but if it's too hard for them i might be better off somewhere else like you said.
so you're saying they should take off the original rubber ducts? the ms kit has ducts already built in so are those sufficient? how can i keep my rb oil cooler screens in after the fact?
as for fog lights, i read the thread about the install and know you can cut the ms grill so the lights can come through but they said it wasn't possible to move them forward anymore. you guys are saying that your fogs stick through the mesh? i can make them fix all this for free, but if it's too hard for them i might be better off somewhere else like you said.
#13
Does anyone have the install instruction(english version) and willing to scan them and post them here? I'm trying to find the instruction to prove to my dealer that the OEM oil cooler duct must be removed for MS duct or else they won't remove them. Right now, they have both OEM and MS duct installed and they jam the MS duct in there. Any help is much appreciated.
#14
mkuhnracing.com
iTrader: (3)
You can download the Instructions from here
http://www.mediafire.com/download.php?tl0nhabbxsc
It also has instructions for installation of a few other MS parts..
http://www.mediafire.com/download.php?tl0nhabbxsc
It also has instructions for installation of a few other MS parts..
#21
dondo, thanks for the instruction. The dealership has agreed to remove the OEM duct. I could have done it myself but it's the principle, I just want to prove them wrong.
#22
Thread
Thread Starter
Forum
Replies
Last Post