Kazera KZ-A wheels.
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: Northern Kentucky
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Kazera KZ-A wheels.
I've done multiple searches on google, this forum, site:rx8club.com, etc. But can't seem to find any info on what I'm looking for.
I am looking into purchasing a set of used Kazera KZ-A wheels.
The problem is I don't know what the bore is on it and if I need hubcentric rings for it to fit.
I know that gyeaboy (https://www.rx8club.com/rx-8-parts-sale-wanted-44/wtt-so-cal-only-kazera-kz-silver-your-stock-18s-143412/) had them on his 8 and tried to send out a PM but just in case I thought I'd ask on the forum for others to help me out too.
I just want to make sure I can get these rims and be able to fit them on my car without hubcentric rings if possible. If not I'll get them but not be able to run them for ImportFaceOff next week end
I am looking into purchasing a set of used Kazera KZ-A wheels.
The problem is I don't know what the bore is on it and if I need hubcentric rings for it to fit.
I know that gyeaboy (https://www.rx8club.com/rx-8-parts-sale-wanted-44/wtt-so-cal-only-kazera-kz-silver-your-stock-18s-143412/) had them on his 8 and tried to send out a PM but just in case I thought I'd ask on the forum for others to help me out too.
I just want to make sure I can get these rims and be able to fit them on my car without hubcentric rings if possible. If not I'll get them but not be able to run them for ImportFaceOff next week end
#2
Registered
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: Northern Kentucky
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
And my bad, this should belong in the wheels section rather than the exterior.. If mod can move it, it'd be greatly appreciated. I guess that's what happens when I don't get more than 2 hours of sleep :facepalm:
#5
Registered
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: Northern Kentucky
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
The ones that I am looking at have a universal 5x100 and 5x114.3 lug.
Does anyone know what the width they come in?
The guy selling them isn't sure and I want a rough idea before I make a 1hr trip up there to check them out.
I'm looking for something in the 18x8 and 18x9 range.
The ones that I am looking at have a universal 5x100 and 5x114.3 lug.
Does anyone know what the width they come in?
The guy selling them isn't sure and I want a rough idea before I make a 1hr trip up there to check them out.
I'm looking for something in the 18x8 and 18x9 range.
#6
Registered
iTrader: (2)
Join Date: May 2010
Location: Barksdale AFB, LA
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
I believe mine are 18x8.5 I can look tonight. Make sure you get the offset you want I think mine are +45 (I didn't know what offset was at the time) and I don't like the way it looks. Sharp looking wheels for the price if you can get the right spec. I also don't use hub adapters but it couldn't hurt to take some of the stress off the studs, and some of them are fairly cheap. I did break one stud on my previous 8 with some American Racings wheels that didn't have the same hub bore soo... like I said couldn't hurt.
Thread
Thread Starter
Forum
Replies
Last Post
Rx8 VA Guy
RX-8 Parts For Sale/Wanted
7
06-04-2016 12:42 AM
dweezil22
NE For Sale/Wanted
12
09-09-2015 10:50 AM
jdzoom8
RX-8 Parts For Sale/Wanted
1
08-19-2015 03:32 PM