Fiberglass Fender Vents??
Registered
Joined: Apr 2006
Posts: 1,539
Likes: 0
when this thing first kicked off a friend of mine was in the original list. he didnt receive anything for months after payment. he also made numerous attempts to contact jay without response for days, sometimes weeks. i hear a lot about such cases. i also hear success stories too, so i guess its really a lack of quality control, consistency.
jay, i admire your persistence in making this product as best as it can be, even going as far as to make them fit and install BETTER than originals. however, i am still not certain of your customer service skills which have been questionable in the past. you put out a lot of good products that i would like to see myself owning one day, but what scares me is having a problem with my order then having to deal with a lot of waiting. perhaps you need to hire someone to deal with customers so that you can concentrate on production? not sure if that would be better..
Zip ties is for sure not the solution to go on this. Majot issue on our first vents is that factory did not trim it to the exact size of the original vents. So when put on it will be too short. Now I got a 8, I'll make sure all fits first. (Even tho I have to drive around with out any vents =( )
Want to let you guys know. I did finally came up with a solution. These vents now snaps on. Installation only took me 30 sec to put on. I drove my 8 with them on for 3 days in raining days. Still holds strong. With my own 8 I can take more time figure out how to fix this. I found the exact point where the vents needs to be hold. At those 2 points I made custom metal clips. Below is a video of how to install. Happy Holidays.
http://www.youtube.com/watch?v=6nZtr9uIqRw
http://www.youtube.com/watch?v=6nZtr9uIqRw
the bukkake master!
Joined: Apr 2005
Posts: 1,972
Likes: 1
From: Staten Island, NY
i'm glad to see that everything is starting to come together with these. i have a question tho. for the removal of the OEM vents you would have to go through the wheel well correct? only problem for me would be that my side skirts screw over the wheel wells so i might have to take off the skirt unless there is another way to do it?
i'm glad to see that everything is starting to come together with these. i have a question tho. for the removal of the OEM vents you would have to go through the wheel well correct? only problem for me would be that my side skirts screw over the wheel wells so i might have to take off the skirt unless there is another way to do it?
OK sounds good, thanks for making the video - it shows that you do care about getting us the better designed vents... I will await you final design. Please let me know when you have it all figured out... and if I should ship my painted vents back to you or if you are going to supply new painted ones upon the return of my vents etc..
-C
-C
OK sounds good, thanks for making the video - it shows that you do care about getting us the better designed vents... I will await you final design. Please let me know when you have it all figured out... and if I should ship my painted vents back to you or if you are going to supply new painted ones upon the return of my vents etc..
-C
-C
i gotta tell ya, i have been monitoring this thread to see what came of it.
while i commend you for your efforts, the video you posted shows that the slightest tough makes them buckle in the middle. you should probably put the same clips that you have on the top and bottom onto the sides as well.
while i commend you for your efforts, the video you posted shows that the slightest tough makes them buckle in the middle. you should probably put the same clips that you have on the top and bottom onto the sides as well.
i gotta tell ya, i have been monitoring this thread to see what came of it.
while i commend you for your efforts, the video you posted shows that the slightest tough makes them buckle in the middle. you should probably put the same clips that you have on the top and bottom onto the sides as well.
while i commend you for your efforts, the video you posted shows that the slightest tough makes them buckle in the middle. you should probably put the same clips that you have on the top and bottom onto the sides as well.
the bukkake master!
Joined: Apr 2005
Posts: 1,972
Likes: 1
From: Staten Island, NY
ok well i just got finished trying to install my vents. fitment was not very good at all. they both were not properly trimmed down and were bulging at the middle. they did not sit any where close to flush to the body. on the passenger vent there was a big gap on the bottom but that could have been because of the lack of trimming. in all i'm not happy with them and i have the stock vent on now. i realize that nothing is going to fit as good as stock but my new vents werent close.
You need to move around and try to push the center part all the way in. Make sure center part have a clip on it. I did include extra clip. Once center part is curved in, the top part should close the gap very well. Cuz this vent is curved. If you take time and try it will work.
the bukkake master!
Joined: Apr 2005
Posts: 1,972
Likes: 1
From: Staten Island, NY
ok well i ventured out to install the vents again and jay was right, i needed to push more in the center to get them in. so i got the vents in and the clips seem to be holding up but tomorrow will be the first drive so we'll see. one of the vents just needs to be trimmed slightly so it will clear the body and take away a gap on the bottom. i'll post up pics once i load them onto my computer
