Calling all R-Magic lip kits
05-19-2010, 10:30 PM
#51
Registered
iTrader: (1)
Join Date: May 2007
Location: Central PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
i've looked around - anybody have any advice or tips on how to install the rmagic front lip? I have factory lip and no directions....haven't looked under the car yet....thanks
05-28-2010, 04:06 PM
#53
RX8 Club OG
Thread Starter
Join Date: Aug 2004
Location: Clinton NJ
Posts: 2,459
Likes: 0
Received 0 Likes
on
0 Posts
kartsman....
first off... u will need to take off the appearance package lip... and u will actually need the stock plastic piece that comes on the base model... ie no app package lip... dont worry about the holes... the new lip covers them
If you got an authentic lip... it will have two small dimples where the lip meets at the end of the front bumper... two screws get installed on each side... the front of the lip is held on by double sided tape.. which should have came with it.. if not any autoparts store or walmart has that... the lip is urethane, so it will flex alittle... it is very easy to put on...
first off... u will need to take off the appearance package lip... and u will actually need the stock plastic piece that comes on the base model... ie no app package lip... dont worry about the holes... the new lip covers them
If you got an authentic lip... it will have two small dimples where the lip meets at the end of the front bumper... two screws get installed on each side... the front of the lip is held on by double sided tape.. which should have came with it.. if not any autoparts store or walmart has that... the lip is urethane, so it will flex alittle... it is very easy to put on...
Last edited by Alucard; 05-28-2010 at 04:08 PM.
05-28-2010, 08:59 PM
#54
Registered
iTrader: (1)
Join Date: May 2007
Location: Central PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
kartsman....
first off... u will need to take off the appearance package lip... and u will actually need the stock plastic piece that comes on the base model... ie no app package lip... dont worry about the holes... the new lip covers them
If you got an authentic lip... it will have two small dimples where the lip meets at the end of the front bumper... two screws get installed on each side... the front of the lip is held on by double sided tape.. which should have came with it.. if not any autoparts store or walmart has that... the lip is urethane, so it will flex alittle... it is very easy to put on...
first off... u will need to take off the appearance package lip... and u will actually need the stock plastic piece that comes on the base model... ie no app package lip... dont worry about the holes... the new lip covers them
If you got an authentic lip... it will have two small dimples where the lip meets at the end of the front bumper... two screws get installed on each side... the front of the lip is held on by double sided tape.. which should have came with it.. if not any autoparts store or walmart has that... the lip is urethane, so it will flex alittle... it is very easy to put on...
05-29-2010, 10:49 AM
#55
RX8 Club OG
Thread Starter
Join Date: Aug 2004
Location: Clinton NJ
Posts: 2,459
Likes: 0
Received 0 Likes
on
0 Posts
small screws... i will go and take a pic of where to put the screws....
it is very easy to remove the stock lip.... u will need to take off the front bumper for this install.... do u know how to do that?
for the front lip there is i think 8 small screws on the underside that attach to the tray.. then there is 4 nuts that hold on the front lip from inside of the bumper... then the lip will come off
it is very easy to remove the stock lip.... u will need to take off the front bumper for this install.... do u know how to do that?
for the front lip there is i think 8 small screws on the underside that attach to the tray.. then there is 4 nuts that hold on the front lip from inside of the bumper... then the lip will come off
05-29-2010, 02:11 PM
#56
Registered
iTrader: (1)
Join Date: May 2007
Location: Central PA
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
small screws... i will go and take a pic of where to put the screws....
it is very easy to remove the stock lip.... u will need to take off the front bumper for this install.... do u know how to do that?
for the front lip there is i think 8 small screws on the underside that attach to the tray.. then there is 4 nuts that hold on the front lip from inside of the bumper... then the lip will come off
it is very easy to remove the stock lip.... u will need to take off the front bumper for this install.... do u know how to do that?
for the front lip there is i think 8 small screws on the underside that attach to the tray.. then there is 4 nuts that hold on the front lip from inside of the bumper... then the lip will come off
Thread
Thread Starter
Forum
Replies
Last Post
05rx8mazda
RX-8 Parts For Sale/Wanted
18
11-28-2015 09:42 AM
Fickert
Series I Major Horsepower Upgrades
7
09-09-2015 01:21 PM
